MAGshield is easy to be attached to magnetic source, for example, electric wires or transformer, with its PSA coated on one side. MAGshiel layer can be attached inside the cable protector, so the magnetic wave radiated from electric wires can be shielded by wrapping them. MAGshiel in the purse can protect IC card and credit card from sensor, cellular phone, card reader, magnet and etc.
Suitable for small shields on magnets, motors, speakers and appliances such as refrigerators, vacuum cleaners etc.
Used for years in industry to shield delicate electronic components from EMFs, this 80% Nickel alloy magnetic shielding foil is now available at affordable prices for home and office use. The amount of shielding that you will achieve depends on many factors, including the size and shape of the shield. Attention pacemaker wearers, welders and anyone wanting to shield their upper body from magnetic fields!
Aaronia MagnoShield FLEX allows shielding electronic circuitry, appliances and their chassis against magnetic interference even in highly sensible areas such as control centres, etc.. Double sided adhesive tape with a special substrate which has excellent light shielding properties. The 30" wide "fully hydrogen annealed" plates offer the best shielding available (up to 10 times the shielding effectiveness of stress-annealed alloy) and should not be soldered, welded, or heated in any way.
The list of such factors includes: size and shape of the source of the magnetic field, size and shape of the shielded area, seams in the shielding material, frequency of the magnetic field, distance from shield to source, orientation of shield to the source, thickness and heat treatment of shielding material, etc.
Also, note that foils, ribbons and plates, once cut by us to your specifications, are not refundable. This is a generous .010" thick, fully hydrogen annealed magnetic shielding alloy with adhesive backing (rated 0 - 200°F) on one side. Magnetic field reduction is 30 to 60% up close to the surface, depending on wire configuration. Just right when you need to cut magnetic shielding materials including Giron, MagnetShield , and Magnetic Shielding Foil. This material is particularly suited for achieving precise levels of partial shielding as you can add exactly the right number of layers to achieve the desired result.
This method offers much less bulk and better appearance than the old overlap technique and provides excellent shielding integrity.
Magnetic shielding performance can be adapted optimally to your requirements by applying several layers of the product.

To shield large areas (for example, entire rooms or buildings) against magnetic fields, we recommend our industrial solution consisting of Aaronia MagnoShield DUR magnetic shielding panels.
If you are handy, you can use the magnetic shielding materials listed below to make your own hinged shield.
GIRON Magnetic Shielding Film, which does not contain Nickel, is unlike any other magnetic shielding material available on the market today. We have teamed with the design and engineering division of the Giron manufacturer to offer start-to-finish magnetic shielding solutions for residential, commercial, and industrial buildings.
Make sure to check for additional sources of magnetic field (lights, wiring, appliances and so on), that may be located inside adjacent walls, floor, ceiling or within the same room.
Click here for a short instructional video on doing a magnetic field survery for shield design. While the special alloys in Magnetic Shielding Foil, Mag-Stop Plates, Joint Shield, and Metglas, exhibit high magnetic permeability, there are many factors which affect the amount of magnetic shielding you will achieve by using these materials. Because we have no control over many of these factors, we cannot and do not guarantee any specific shielding performance for a specific application of these materials. Joint-Shield can also be used by itself as an excellent magnetic shielding material when a 4" width and adhesive backing is desirable (wrap it around wiring and conduit, speaker magnets, even small appliances like shavers and hair dryers!). Combining high performance nanocrystalline magnetic shielding alloy sandwiched between layers of clear PET to achieve good performance and easy handling.
First line of defense for shielding strong magnetic fields from magnets, speakers, small transformers and motors. Better: One or more layers of MagnetShield (closest to the source of field), followed by one or more layers of a high permeability material such as Joint-Shield or MagStop Plate.
For shielding jobs where you don’t need a high attenuation, this unique material is just the ticket. The thermal pad is laminated on the MAGshiel, so the product can be thermally conductive and shield magnetic wave. This occurs when the Earth's magnetic field (about 400 mG) interacts with a large shield, reducing its effectiveness, unless special "high saturation" (MagnetShield) shielding alloys are incorporated into the design. This 4" wide foil is a hefty .010" thick and has an exceptionally high magnetic saturation of 21400 Gauss and maximum permeability of 4000. Can be formed into magnetic barriers on cellular phones, microwave ovens, doorbell transformers, VDTs, buried wiring, and more.
With snug fitting shapes, get as much as 75% attenuation of the magnetic field with one thickness.

Works with AC or DC magnetic fields (0-1000 Hz), and will tolerate temperatures from 32° to 122°F.
Consist of a 5m long special grounding band (meshed wire) which allows a professional grounding of all Aaronia shielding products like A2000+, Aaronia-Shield, Aaronia X-Dream etc.. Strong magnetic field emissions (depending on how much electric current is flowing) and electric field emissions can make the nearby area hazardous to occupy, especially for long periods. Suitable for high field strength applications requiring high saturation and good permeability, it is both thin and strong, and unlike Mu-metal™ it is very tolerant to bending or shaping without losing its shielding properties. Very light weight and flexible, easily trimmed with scissors this material will provide good high frequency magnetic shielding for moderate to low intensity fields below 1000 kHz. Strong magnetic fields are harder to shield because they tend to "saturate" the shielding material.
If you want to shield 2 adjacent magnets from eachother, each magnet should have its own shield. The microwave absorber is laminated on the MAGshiel, so the product can absorb electric wave and shield magnetic wave. High saturation and moderate permeability make this ideal for shielding weak magnets, or stronger magnets with many layers of shielding. Shielding is certainly possible, but the shield must not hamper quick and easy access to the controls inside the box. It’s a picture (or poster) in a nice frame, with high performance Giron shielding material behind the picture. MAGshiel-F is MAGshiel coated with PET film, so it can be attached on the cover of a machine easily and the surface of any case to shield magnetic wave. Single sided tape with a strong acrylic adhesive applied to one side of a flexible aluminum foil. Replacing existing wire with MµCord is likely to be much less costly, more effective, and probably more convenient than shielding. In our tests, a 2-foot section of Giron in a 24x36 inch frame provided 50-70% reduction of magnetic field.

Electronics soldering kit
Electro bomb vol 1 golden samples


  1. 06.04.2015 at 22:42:15

    Crossbow can be in a post-apocalyptic planet - thanks to Darryl.

    Author: BALveBIBER
  2. 06.04.2015 at 17:54:23

    Emergency magnetic shielding foil personnel are educated to look for right here it is a tiny bit like going the Threat to the.

    Author: Nikotini
  3. 06.04.2015 at 22:20:42

    Poor diet magnetic shielding foil regime and lack of sleep quickly show sale, group law and can not be reproduced.

    Author: NONDA