Woodturning bowls video, small wooden pallet projects - Test Out

Categories: Work Bench Plans For Garage | Author: admin 26.11.2011

This woodturning how to video shows how to wood turn a segmented knob on a wood lathe using basic turning tools. The YouTube woodturning how to video shows a woodturner tightening the segmented glue up into the lathe chuck and then turning a tenon.
A star pattern of maple emerges in the woodturning how to video as the woodturning project progresses.
Various grits of sandpaper are used to sand and smooth the wooden project of the woodturning how to video. Finally, the woodturning how to video shows how a wood finish of Tried and True varnish oil finish is applied. This sequel continues our study to learn of one of the great woodworking crafts, segmented woodturning. After the yellow glue has set-up it is time to remove the masking tape and packing tape from the segmented bowl. Next we will determine the base size.To do this we will measure the outside diameter and the mortise diameter of the bowls sidewalls. With the base mounted on the woodturning lathe we will take the segmented assembly and fit the mortise and tenon together.


After the glue-up dries and the bowl structure is complete it is time for turning wood and shaping the bowl.
After the wood turner is finished turning the fruit bowl he will then switch to sandpaper to remove any marks left by the gouge. The wood finish for the segmented fruit bowl started with an application of SealCoat and finished with three coats of satin Arm-R-Seal.
Recommendations for beginning woodworkers: View the segmented woodturning video a multiple times to get a better feel for the procedures.
In this woodturning project a parting tool, roughing gouge, and spindle gouge with a fingernail grind were used to wood turn the glue up.
This ongoing collection of  woodworking videos, articles, and wood projects is for the beginning woodworker as well as the experienced woodworker.
In this woodworking video our focus shifts to learn how to woodturn the segmented fruit bowl.
When we have a good fit we will then proceed with the glue-up of the two parts of our segmented woodturning.
The segmented woodturning video reveals a spindle gouge with a fingernail grind for much of the interior and exterior wood turning.


Since the star pattern is solid throughout the wooden block, the white tips of the maple star appear as white lines between the arched African mahogany on the outside perimeter of the segmented woodturning. We will also be sanding and finishing the fruit bowl that contains 24 segments of which there are 12 staves of light walnut and 12 vertical spacers of dark walnut. He will then tri-fold a quarter sheet and sand with that as the wooden bowl spins on the lathe. Also, the woodturner wants to avoid any splatter of oil as it is applied to the woodturning project. This fruit bowl was sanded to 220 grit sandpaper and then burnished with the wood shavings.
To prepare the wood project for finishing the bowl was then wiped with a micro-fiber towel to remove any remaining dust.



Wooden tie rack plans
Woodshop power tool storage


Comments: