Wood glaze products, woodwork around windows - PDF Review

Categories: Woodworking Plans Corner Desk | Author: admin 16.05.2013

This method utilizes a flow pen instrument to apply glaze to the detail in profiled areas only, such as a lip or crevice. If your product is manufactured with a Rustic Grade or has Distressing, flow pen glaze will not be added to any of the natural defects associated with these types of products, unless they occur in a lip or crevice area. This method utilizes a brush, rag or spray gun to apply glaze to the entire face and profiled areas of the product. Due to this process, the original color will vary slightly between the front and back side of the product, and therefore it becomes necessary to glaze all sheet stock, refacing stock, moldings and accent components. This method will alter the appearance of the original color between the front and back side of the product, and therefore it becomes necessary to glaze all sheet stock, refacing stock, moldings and accent components.
These methods work best with light SolidTone® colors and will alter the appearance of the original color between the front and back side of the product. This method utilizes a fan brush to apply glaze to the entire product, focusing heavily on the profiled areas.
This method will alter the appearance of the original color between the front and back side of the product and therefore it becomes necessary to glaze all sheet stock, refacing stock, moldings and accent components. The Simulated “Fly Speck” glazing method utilizes a nylon brush to apply glaze randomly to the entire product.
Due to the unique glazing effect, it becomes necessary to apply glaze to all refacing or sheet stock, moldings and accent components. This method utilizes either a brush, rag or spray gun to apply glaze to the entire face and profiled areas of the product. This method does alter the appearance of the original stain and wood specie combination and causes the color to vary between the front and back side of the product.


RBT100 – The RBT100 is considered a heavy wear that will expose the bare wood or MDF material beneath the stain or paint.
RBT200 – The RBT200 is considered a light wear that will expose the bare wood or MDF material beneath the stain or paint. Glazed - Glaze will be applied to the entire door, including the exposed Rub Through areas, unless otherwise specified. WalzCraft sells only to Custom Cabinet Makers, Cabinet Refacers and Woodworking Professionals. This method also provides minimum finishing costs, as it is not necessary to apply glaze to sheet stock, refacing stock or moldings that do not have an area for the glaze to rest. Our Flow Pen Glazing Application Drawings will show you where glaze is applied to each profile. The glaze is wiped away with a dry cotton cloth, leaving the glaze build up at the desired level of intensity before the product is then wiped again with a rag soaked with mineral spirits.
The Glaze is wiped away with a dry cotton cloth, leaving the glaze build up at the desired level of intensity. The first method utilizes a spray gun to lightly apply glaze to the entire product, focusing on the face and profiled areas. Due to this glazing affect, it becomes necessary to glaze all sheet stock, refacing stock, moldings and accent components.
Glaze is applied to the fan brush and the excess is removed with a dry cotton cloth before application. This method of application involves standard wiping glaze which is applied to a nylon brush.


This method may be used alone with any stained or SolidTone products, and can be used in conjunction with all other glazing methods. Glaze is wiped away with a dry cotton cloth, allowing build up to the desired level of intensity before wiping with a rag soaked with mineral spirits.
Due to this unique effect, it is necessary to glaze all sheet stock, refacing stock, moldings and accent components. This technique is done after the Stain or SolidTone® color is applied and exposes the bare wood or MDF material beneath.
Solvent Wiped and Dry Wiped glaze methods will alter the color of the bare wood and MDF material. The application of glaze involves moving the brush "back and forth" in a quick manner, so that the glaze adheres primarily to the higher areas of the profile.
The bristles are then pulled back and released quickly with the thumb, sending the glaze off to the surface of the product in tiny droplets. Wiping with the grain leaves a "look" simulating stiff straight brush lines in the product. These exposed areas may be left raw or they can be stained or glazed before finishing with a topcoat. The second method also utilizes a spray gun to lightly apply glaze to the entire product, focusing on the face and profiled areas.




Portable wood planer
Woodworking plan recipe box
Custom wood mailbox plans
Intarsia woodworking patterns free
Design brief a birdhouse


Comments: