Wood dye powder, garage shop layout ideas - How to Do

Categories: Woodworking Shelf Plans | Author: admin 12.04.2012

Here’s an easy fun idea for making a simple wooden serving tray decorative, yet suitable for any holiday or special occasion. For this project we are going to use an aniline wood dye powder rather than paint or stains. One fun thing about wood dye powders is that you can play around with colors, mix various shades to get the perfect hue. Today Mohawk Finishing Products is the leading manufacturer and distributor of professional wood touch up, repair and finishing products. PENOFIN WOOD FINISHES MEET AND EXCEED THE NORTHEAST AIR QUALITY MANAGEMENT DISTRICT'S CLEAN AIR REGULATIONS.
For hundreds of years, enhancing the beauty of wood has been essential to the woodworker's craft. If you’re using the immersion method, you’ll need the same amount of dye with 2 ‘’quarts’’ of water (depending on the size of your product). It’s not a bad idea to dip in one side and set the wood down to dry on a side that isn’t dyed yet. If you like the current shade, consider sealing it with polyurethane spray or a wood varnish. These water-base stains are formulated with a proprietary blend of pigments and dyes to provide rich colors.


Dyeing wood can be done in a number of ways, often with materials that you may have lying around the house. If you haven't yet purchased wood and are looking to do so from a home improvement store, ask if they'll sand it for you. Mix the dye according to the package instructions – you’ll probably need ? cup liquid dye or 1 box of powder dye with 2 cups of very hot water. Dip a piece of scrap wood (or use an area of the wood you’re using that can’t be seen) into the bowl of dye.
It'll also show you how the dye spreads and how you have to apply the dye to get the look you want. Dip a foam or bristle brush or old cloth in the dye and spread it evenly over your wood surface.
Before doing anything with the wood, you should have a suitable place to work in, where you can make a mess and it doesn't matter. With rubber gloves on to prevent staining your hands and fingers, add a package of drink powder to water to create a dye. Using a foam brush, spread the paint everywhere on the wood, wherever you need the dye to be applied. Be sure to coat the entirety of the wood before you move onto coating it a second time to keep the color even.


The more dye that you add, the more saturated the color will be (and the less water you use, too). A resealable plastic bag is ideal for immersing the wood, depending on how large the piece of wood is. For the record, this isn't a very strong dye and is only suitable for light colored wood, such as pine. These will be used as part of the dye, making it richer and deeper – and that translates to fewer coats for you to spread.
While the coffee is still warm (not hot), use a paintbrush or rag dipped into the coffee and apply it to the wood. Use a glass or ceramic bowl to avoid reactions with the dye colors in the microwave and stir well. If dye drops splash onto your wood, you can get rid of them by sanding the wood immediately.
Use a table or other surface that is comfortable to work on and that you’re okay getting a splash of dye on.



House plans lake cabin
Fine woodworking taunton press


Comments: