Wood dye on pine, table saw wood pusher - Test Out

Categories: Wood Wine Rack Plans | Author: admin 04.01.2015

If you want to use wax over a spirit based dye, apply one coat of Danish Oil before waxing. Water-based Wood Dyes are available in the same colour range as the spirit-based dyes, except for Rimu. For a really intense colour, try using the water-based dyes first, then (once dry) apply a spirit-based dye over the top. Water-based dyes can be thinned with water (of course!), and take a little longer to dry completely – around 30-40 minutes. As with the spirit-based dyes, the water-based dyes are not a finish in themselves, and must be sealed with Danish or Teak Oil. Note: These are pictures of actual samples – Briwax spirit-based dye was applied to bare timber by wiping with a cloth. When you have a large surface to cover,use a spray bottle to apply the dye and a brush to spread it.

Glazing adds a second, separate layer of color that really makes the pine come alive (Step 6).
American Woodworker magazine was acquired by F+W Media (parent company of Popular Woodworking) in 2014. Provides Wood Finishers With Shellac Flakes, Oil Finishes, Furniture Wax, Leather Conditioner, Metal Polish, Wood Stain, Wood Dyes and Tints, Danish Oil, Cheese Cloth, Steel Wool & More.
Unfortunately, when woodworkers try to duplicate that color on new pine by using stain, the results are usually disappointing. Shellac and glaze add color in layers, creating depth and richness.This coloring process works on all types of pine, although the end result varies from one species to another. It limits the dye’s penetration by partially sealing the wood, like a thin coat of finish.
Water-soluble dye from other manufacturers will work just as well, although the color will be different.

For all interior woodwork around the home including softwood, with the natural beauty of the grain remaining visible.The acrylic element minimizes grain raising allowing for quick and uniform results on large and small surfaces such as furniture, floors, doors, cupboards, frames, toys, decorative items and many more. Second, pine’s surface is usually loaded with randomly occurring figure and super-absorbent pockets that suck up stain and look blotchy.
If you follow the process presented here, you can give pine deep, rich-looking color without losing it’s natural appearance.
If your epoxy cures milky-white, touch it up later, after you’ve dyed the wood and sealed it with shellac. More than two coats of dye may affect the final finish. Please refer to product label for complete product information.

Simple wooden bench designs
Woodworking figure 8 fasteners