Red oak wood veneer sheets, powermatic 180 planer for sale - Review

Categories: Wooden Work Bench | Author: admin 13.10.2013

Whether you're a hobbyist or a furniture maker, you'll be delighted with the result you get with this all natural wood veneer by Sauers & Co. Various methods of cutting and matching face veneers allow for a variety of exceptional options to make any project a signature work of art. A half or quarter log is placed on the slicer which forces it laterally against a knife to produce narrow veneer sheets with somewhat more predictable grain patterns. The quarter log is mounted in the slicer so that the knife cuts across the growth rings at approximately a right angle and parallel to the rays, resulting in a highly three dimensional ray flake appearance in red and white oak. The quarter log is mounted on a modified lathe to produce a cut that crosses both the growth rings and the rays at a slight angle, resulting in a relatively straight grain effect that minimizes the bold ray flake appearance found in quarter sliced wood.
Note: Both quarter sliced and rift cut veneer are more often than not pulled from the straight grain portion of plain sliced veneer from the region of the log closest to its center.

Every other leaf or component of veneer from a given log is turned over to produce a mirror image at the splice joint, much like turning the pages of a book, to produce a very aesthetically appealing look across the face. This allows for the panel face to be applied with the tight side of the veneer facing outward in order to minimize the potential for a barber pole effect occasionally observed with book matched veneer.
Components are arranged in the order they come from a given stack of veneer that may have come from a number of logs with no consideration given to matching for color or grain. For architects and designers specifying Flat Cut Red Oak Veneer, please select the Premium option below, with product number DSV-8230.
The resulting veneer is called quarter sliced if heavy flake is visible and rift cut when the flake is minimal. Matching selections may be more obvious in some species than in others depending on the natural grain characteristic of that wood species.

If purchased at a Woodcraft Store, please return the item directly to the store where your purchase was made. Generally, slicing veneer produces more of a solid lumber appearance associated with the manner in which the half or quarter log is positioned in the slicer. Veneer leaves are kept in order as they are cut from the log to ensure a consistent appearance, making sliced veneer generally more prized than rotary cut veneer. For refacing and do-it-yourself veneer jobs, consider the peel-and-stick PSA backing option below.

Metal roof carport plans
Thin sheets of wood veneer