Picnic table plans free 8 ft, free house plans pdf - With Secrets

Categories: Wooden Park Bench Plans | Author: admin 11.02.2014

You can leave the table with no finish and it will weather a light grey, or you can apply a sealer a stain or paint. Although that table is hexagonal (six sided) and this table is octagonal (eight sided), the assembly method is pretty much the same for both types of table.
Make up both the tabletop support upper frame (d, d1, d2) and the seat support lower frame (c, c1, c2), on flat ground using the lumber in the cutting list above. Nail three metal galvanized strap plates to the top side and to the underside of both frames where they meet in the center (12 strap plates in all). Place packers or blocks under the seat frame until the seat frame sits at the appropriate height above the tabletop frame.


It was a little more work than the standard table, but very easy to do with the plans you provided. Dear Sirs, I wanted to let you know that I built your 8-sided picnic table, from the free plans that you posted on your web site. This four seater picnic table with attached seating is made solely our of 2x4 dressed treated lumber. Stand the two end frames upright and fix the seat members and the table members to the appropriate cross members. Turn the picnic table upside down and fix the braces in place insuring that the end frames are square (at right angles) to the table and seat members.


Before nailing these in place, measure the distances between the stretchers so again you are ensuring the table is square.



Simple utility shelf plans
Big green egg stand diy
Woodshop


Comments: