Oil based wood finish vs water based, interior wood stains brands - Reviews

Categories: Woodworking Projects For Beginners | Author: admin 11.07.2012

Both water based and oil based poly offer good protection; the biggest difference is in appearance. Most water-based polys contain only 30 to 35 percent solids, compared with the 45 to 50 percent solids in oil-based products.
There's debate over which finish is harder, but some experts maintain that hardness isn't necessarily a good attribute of a floor finish.
For those of you who have worked with oil based stain but not water based stain, the water based is a completely different consistency.
As I suspected, the water based stain went on sooooo much thicker than your typical oil based stain. Even though the stains are the same shade, it’s like the water based stain has more red undertones in it. My husband built a large farmhouse table and our dilemma is using an oil based or water based stain.


Screening and top coating is a method of renewing the finish on a wood floor without actually removing the old finish and sanding down the wood.
Oil-based poly will always have a place in the hardwood floorr industry, but with the trendy changes in law we can expect that newer, more competitive finishes will emerge. The water-based finishes (with hardener) has proven to be tougher, more durable, and more resistant to household spills. Our dustless sanding equipment is state of the art, and we only use the very best wood floor refinishing and recoating products.
If your wooden floor is starting to look a little worn perhaps all you need to do is refinish it for the floor to get a shinier look again. Since these solids create the protective finish, you need to apply four coats, as opposed to two or three.
Significantly outperforms all urethane finishes, including Bona Traffic, in durability at 24 hours.


In fact, by the first day after I’ve finished the last coat, people have told me that they can’t even smell the fumes. They won't give wood the rich glow that oil-based polys impart; some even consider them cold looking. This type of finish will take 3-7 days to cure hard enough before furniture can be placed back onto the floor. They'll slightly accent the character of your wood without giving it the amber tint of an oil-based poly. When I applied waterborne poly recently, I found that it went on so clear I had to use a bottle cap to mark each 8-in.



Plywood wall cabinet plans
Free cradle plans woodworking
Plans for full size bunk beds
Small timber frame home plans designs


Comments: