Dove tail joint, woodturning dvds uk - PDF Review

Categories: Wooden Work Bench | Author: admin 23.12.2013

Striking a perfect blend of form and function, dovetail joints add great interest and detail while enhancing the structural integrity of a case, box, or drawer. Dovetails provide not only mechanical strength as the pins and tails interlock, but also plenty of long-grain-to-long-grain glue surfaces for a long-lasting joint. Most dovetail joints begin and end with a half-pin on the outside, with the rest of the space subdivided into multiple pins and tails. Scribe baselines—With the orientation of the tail board and the pin board established, scribe the baselines on both using a marking gauge.
Mastering the basics of dovetailing opens the doors to many design options, allowing you to increase the strength of the joint as needed or add visual pop. This joint has enough pins to ensure that the joint is sound, but not so many that the joint is laborious to execute.


The sky is the limit in what can be done to capitalize on both the form and the functional aspects that the dovetail joint affords the craftsman. He demonstrates how to set the tail spacing, mark the tail board, cut the tail board, and then mark and cut the pin board. Begin by marking out the orientation of the pin and tail boards: inside and outside faces, top and bottom, front and back.
A dovetail saddle marker can be handy here because it allows you to draw the two lines across the top and down the face quickly and without misalignment.
This is a common practice with hand-cut dovetails and also can be done on the bandsaw or tablesaw, as well as with the better machine-dovetail systems. More slope pulls the joint together efficiently; too little slope may require clamps or other aids to pull the joint together, much like a box or finger joint requires clamping pressure in two directions.


Remember that tail boards generally make up the sides of drawers and cases, and the fronts and backs of chests; pin boards are usually the fronts and backs of drawers, tops and bottoms of cases, and ends of chests. Second, i find it easier to align, hold, and transfer the tails to the pin board because the pin board can be held securely in a vise and the tail board can lay horizontally, easily registering on the pin-board ends. If the baseline is proud of the pin board’s inner face, the pins will be too small, resulting in a loose joint.



Plywood veneers australia
Building plans octagon picnic table
Child rocking chair plans
Plans for building a birdhouse
Tenon cutter lowes


Comments: