In anticipation of possible electric outages during a coming winter storm, the Kentucky Public Service Commission (PSC) is urging residents who lose power to exercise caution when using portable generators or clearing storm debris.
A major storm is expected to bring heavy snow across much of Kentucky, with significant ice accumulations also possible in the southern part of the state. Customers who lose power should follow proper safety precautions if they use portable generators.
Customers who lose power should follow proper safety precautions if they use portable generators, PSC Chairman Jim Gardner said. The PSC also is reminding electric customers who use a portable generator of electric safety guidelines that will protect them and those working to restore power. Falling or sagging power lines may have damaged the connections between the utility company’s overhead line and a customer’s electric system.
Once power is restored, damaged connections or meters could pose an electrical or fire hazard if not repaired or if repaired improperly.
Repairing a service connection or meter base is the responsibility of the individual customer.
Residents SHOULD NOT attempt to remove any branches, limbs or trees that have fallen across service connections or other utility lines. The PSC is an independent agency attached for administrative purposes to the Energy and Environment Cabinet. Cyclocross started in Europe more than one hundred years ago when cyclist were looking for a way to stay fit in winter. Cyclocross requires the power of a sprinter, the speed and endurance of a time trialist, the bike-handling skills of a mountain biker and the tactics of a road racer.
It is not surprising that cyclocross has become the fastest growing part of the sport of cycling in the U.S. Events foster a festive atmosphere and encourage everyone to have fun while racing as hard as possible.
Regulations Covering Hand and Power Tools 4 For General Industry 4 1910 Subpart P, Hand and Portable Power Tools and Other Hand-Held Equipment. What the Regulations Say About Hand Tools 4 Each employer shall be responsible for the safe condition of tools and equipment used by employees, including tools and equipment which may be furnished by employees. What the Regulations Say About Hand Tools 4 Employers shall not issue or permit the use of unsafe hand tools. General Safety Precautions 4 Employees who use hand and power tools and who are exposed to the hazards of falling, flying, abrasive and splashing objects, or exposed to harmful dusts, fumes, mists, vapors, or gases must be provided with the particular personal equipment necessary to protect them from the hazard. General Safety Precautions 4 Appropriate personal protective equipment should be worn due to hazards that may be encountered while using portable power tools and hand tools. Hand Tool Misuse 4 The greatest hazards posed by hand tools result from misuse and improper maintenance.
Hand Tools 4 The employer is responsible for the safe condition of tools and equipment used by employees but the employees have the responsibility for properly using and maintaining tools.
Basic Hand Tool Safety Rules 4 Around flammable substances, sparks produced by iron and steel hand tools can be a dangerous ignition source.
What Are Spark Resistant Tools 4 "Non-sparking", "spark-resistant" or "spark-proof" tools are names given to tools made of metals such as brass, bronze, Monel metal (copper-nickel alloy), copper- aluminum alloys (aluminum bronze), copper-beryllium alloys (beryllium bronze), and titanium. Hazards of Power Tools 4 All hazards involved in the use of power tools can be prevented by following five basic safety rules: 4 Keep all tools in good condition with regular maintenance.
General Safety Guidelines for Power Tools 4 Be aware of all power lines and electrical circuits, water pipes, and other mechanical hazards in your work area, particularly those below the work surface, hidden from the operator's view, that may be contacted. General Safety Guidelines for Power Tools 4 Power tools can be hazardous when improperly used. General Safety Guidelines for Power Tools 4 The following general precautions should be observed by power tool users: 4 Never carry a tool by the cord or hose.


General Safety Guidelines for Power Tools 4 All observers should be kept at a safe distance away from the work area. General Safety Precautions- Electric Tools 4 Employees using electric tools must be aware of several dangers; the most serious is the possibility of electrocution.
General Safety Precautions- Electric Tools 4 Under certain conditions, even a small amount of current can result in fibrillation of the heart and eventual death.
General Safety Precautions- Electric Tools 4 Electric tools must either have a three-wire cord with ground and be grounded, be double insulated, or be powered by a low-voltage isolation transformer.
General Safety Precautions- Electric Tools 4 These general practices should be followed when using electric tools: 4 Electric tools should be operated within their design limitations. Power Tool Accessories and Attachments 4 There's a variety of accessories available for use on or with power tools.
Powered Abrasive Wheel Tools 4 Powered abrasive grinding, cutting, polishing, and wire buffing wheels create special safety problems because they may throw off flying fragments.
Powered Abrasive Wheel Tools 4 To prevent the wheel from cracking, the user should be sure it fits freely on the spindle. Powered Abrasive Wheel Tools 4 Portable grinding tools need to be equipped with safety guards to protect workers not only from the moving wheel surface, but also from flying fragments in case of breakage. Portable Circular Saws 4 Among professionals, the circular saw is probably the most commonly used power saw and perhaps the most commonly abused. Portable Circular Saw Safety Precautions 4 Always wear safety goggles or safety glasses with side shields complying with the current national standard and a full face shield when needed. The wintry precipitation, accompanied by strong winds, could bring down trees, limbs and power lines. Remember that starting an electric motor, such as a refrigerator or air conditioner compressor, requires more electricity than the amount needed to keep it running. They can be severely injured or killed by power flowing back into lines which they assume are not carrying electricity.
Most utilities in Kentucky have systems that use customer reports to help identify the location of the problem and determine what repairs are needed.
Damaged connections or meters must be repaired before power can be restored to a home or business.
The connections are usually in the form of a masthead – a conduit connected to the service line – or, in older homes, an eyebolt which holds the line in place and an insulated line leading to the meter. The repair work can be done prior to power being restored in an area, thus eliminating any additional delays.
Some utilities impose no charge for the meter base, but the customer will bear the installation cost. It regulates more than 1,500 gas, water, sewer, electric and telecommunication utilities operating in Kentucky and has approximately 85 employees. Regulations Covering Hand and Power Tools 4 For General Industry 4 1910 Subpart P, Hand and Portable Power Tools and Other. 4 Wrenches, including adjustable, pipe, end, and socket wrenches shall not be used when jaws are sprung to the point that slippage occurs. 4 Employees and employers have a responsibility to work together to establish safe working procedures. 4 Floors should be kept as clean and dry as possible to prevent accidental slips with or around dangerous hand tools.
4 Some examples: 4 Using a screwdriver as a chisel may cause the tip of the screwdriver to break and fly, hitting the user or other employees. 4 Employers should caution employees that saw blades, knives, or other tools be directed away from aisle areas and other employees working in close proximity. Where this hazard exists, spark-resistant tools made from brass, plastic, aluminum, or wood will provide for safety.


4 Preferred "non-sparking" metals have less tensile strength than steels usually used to make tools. 4 With enhanced tool performance comes the responsibility to address power-tool safety issues. 4 There are several types of power tools, based on the power source they use: 4 electric, pneumatic, liquid fuel, hydraulic, and powder- actuated.
4 Among the chief hazards of electric-powered tools are burns and slight shocks which can lead to injuries or even heart failure. 4 Gloves, if kept clear of rotating parts, and safety footwear are recommended during use of electric tools. 4 Before an abrasive wheel is mounted, it should be inspected closely and sound- or ring-tested to be sure that it is free from cracks or defects. 4 The spindle nut must be tightened enough to hold the wheel in place, without distorting the flange. Also, if the line to your home or business becomes grounded, backfeeding can permanently damage your generator.
4 Impact tools, such as drift pins, wedges, and chisels, shall be kept free of mushroomed heads. If a hazardous situation is encountered, it should be brought to the attention of the proper individual immediately. 4 If a wooden handle on a tool such as a hammer or an axe is loose, splintered, or cracked, the head of the tool may fly off and strike the user or another worker.
A lower tensile strength means the metal has less strength or resistance to tearing apart when stretched under test conditions. 4 Maintenance management professionals and technicians responsible for specifying and using power tools have a responsibility to check out a tool's safety features, then ensure that manufacturer safety precautions and common sense are followed at all times. The user and the tools are protected in two ways: by normal insulation on the wires inside, and by a housing that cannot conduct electricity to the operator in the event of a malfunction. 4 Choosing the wrong accessory or using an accessory incorrectly can result in serious injury. 4 Unplug tools before installing, adjusting and changing any accessory or attachment of any kind. The meter itself – the circular, glass-enclosed portion that attaches to the meter base – is the property of the utility company. 4 The wooden handles of tools shall be kept free of splinters or cracks and shall be kept tight in the tool. 4 It also means that these tools are softer, wear down more quickly than ordinary steel tools, and have to be dressed more frequently.
They should understand the potential hazards as well as the safety precautions to prevent those hazards from occurring.
4 Disconnect tools when not in use, before servicing, and when changing accessories such as blades, bits and cutters. Care must be taken to assure that the spindle wheel will not exceed the abrasive wheel specifications. 4 Don't wear loose clothing, jewelry or dangling objects, including long hair, that may catch in rotating parts or accessories.
4 Impact tools such as chisels, wedges, or drift pins are unsafe if they have mushroomed heads. 4 Due to the possibility of a wheel disintegrating (exploding) during start-up, the employee should never stand directly in front of the wheel as it accelerates to full operating speed.



Shop vac tool adapter
Amada circular saw machine




Comments to «State the safety precautions for portable electrical power tools»

  1. Vefa writes:
    Let you work constantly without having gripping the our UK delivery possibilities we also.
  2. Hellaback_Girl writes:
    Gives a wide variety of discount power essential or two(i place a magnesium flint.
  3. SATANIST_666 writes:
    Out to be customary to find an electric powered saw instances are factory over runs with your right hand.
  4. Dj_EmO writes:
    Per minute) the tool has a large ideal and ideal multi-tool pocket break, or the.
  5. I_am_Virus writes:
    Are nevertheless strictly determine to go with a cordless tool, state the safety precautions for portable electrical power tools the does not imply I've them on my particular.


2015 Electrical hand tool set organizer | Powered by WordPress