Hand and Power Tool Safety Employees who use hand and power tools and who are exposed to the hazards of falling, flying, abrasive and splashing objects, or exposed to harmful dusts, fumes, mists, va.. Hand and Power Tools Landscaping Related Activities Hand digging, shoveling, raking and grading Maintaining equipment Building and constructing landscape related structures Tree felling, trimming and pruning Grass trimming and leaf blowing Hazardous Conditions and Unsafe Acts Broken and defective tools Missing guards, exposed belts and blades Bad electrical cords Misuse of tools Mushroomed heads Cracked and split handles Not using required PPE Potential Outcomes Bruises, sprains and strains Struck by projectiles Lacerations and amputations Entanglement Eye and face injuries due to flying objects Shocks and electrocutions Leading to injury or death Unsafe Tool Use can be Deadly General Tool Safety Rules Maintain regularly Use the right tool for the job Inspect before use Operate according to the manufacturera€™s instructions Use the proper personal protective equipment Use the guards Landscape Construction Tools Building and Constructing Tools Often landscapers must build or construct as part of their job. Regulations Covering Hand and Power Tools For General Industry 1910 Subpart P, Hand and Portable Power Tools and Other Hand-Held Equipment.
What the Regulations Say About Hand Tools Each employer shall be responsible for the safe condition of tools and equipment used by employees, including tools and equipment which may be furnished by employees.
What the Regulations Say About Hand Tools Employers shall not issue or permit the use of unsafe hand tools.
General Safety Precautions Employees who use hand and power tools and who are exposed to the hazards of falling, flying, abrasive and splashing objects, or exposed to harmful dusts, fumes, mists, vapors, or gases must be provided with the particular personal equipment necessary to protect them from the hazard.
General Safety Precautions Appropriate personal protective equipment should be worn due to hazards that may be encountered while using portable power tools and hand tools. Hand Tool Misuse The greatest hazards posed by hand tools result from misuse and improper maintenance.
Hand Tools The employer is responsible for the safe condition of tools and equipment used by employees but the employees have the responsibility for properly using and maintaining tools. Basic Hand Tool Safety Rules Around flammable substances, sparks produced by iron and steel hand tools can be a dangerous ignition source. Hazards of Power Tools All hazards involved in the use of power tools can be prevented by following five basic safety rules: Keep all tools in good condition with regular maintenance. General Safety Guidelines for Power Tools Be aware of all power lines and electrical circuits, water pipes, and other mechanical hazards in your work area, particularly those below the work surface, hidden from the operator’s view, that may be contacted. General Safety Guidelines for Power Tools Power tools can be hazardous when improperly used. General Safety Guidelines for Power Tools The following general precautions should be observed by power tool users: Never carry a tool by the cord or hose.
General Safety Guidelines for Power Tools All observers should be kept at a safe distance away from the work area. General Safety Precautions- Electric Tools Employees using electric tools must be aware of several dangers; the most serious is the possibility of electrocution. General Safety Precautions- Electric Tools Under certain conditions, even a small amount of current can result in fibrillation of the heart and eventual death.
General Safety Precautions- Electric Tools Electric tools must either have a three-wire cord with ground and be grounded, be double insulated, or be powered by a low-voltage isolation transformer. General Safety Precautions- Electric Tools These general practices should be followed when using electric tools: Electric tools should be operated within their design limitations. Power Tool Accessories and Attachments There’s a variety of accessories available for use on or with power tools. Powered Abrasive Wheel Tools Powered abrasive grinding, cutting, polishing, and wire buffing wheels create special safety problems because they may throw off flying fragments.
Powered Abrasive Wheel Tools To prevent the wheel from cracking, the user should be sure it fits freely on the spindle. Powered Abrasive Wheel Tools Portable grinding tools need to be equipped with safety guards to protect workers not only from the moving wheel surface, but also from flying fragments in case of breakage. Portable Circular Saws Among professionals, the circular saw is probably the most commonly used power saw and perhaps the most commonly abused.
Portable Circular Saw Safety Precautions Always wear safety goggles or safety glasses with side shields complying with the current national standard and a full face shield when needed.
Portable Circular Saw Safety Precautions For maximum control, hold the saw firmly with both hands after securing the workpiece. Portable Drills Available in a variety of types and capacities, portable power drills are undoubtedly the most used power tools. Portable Drill Safety Precautions Check carefully for loose power cord connections and frays or damage to the cord.
Pneumatic Tools Pneumatic tools are powered by compressed air and include chippers, drills, hammers, and sanders. Pneumatic Powered Tools Pneumatic power tools shall be secured to the hose or whip by some positive means to prevent the tool from becoming accidentally disconnected.
Pneumatic Powered Tools The manufacturer’s safe operating pressure for hoses, pipes, valves, filters, and other fittings shall not be exceeded, The use of hoses for hoisting or lowering tools shall not be permitted. Pneumatic Tools A safety clip or retainer must be installed to prevent attachments, such as chisels on a chipping hammer, from being unintentionally shot from the barrel.
Caring for the Compressed Air System Using pneumatic tools requires an efficient compressor system to adequately power the tools. Contaminates in the Compressor System The most common problem is water in compressed air All air contains a certain amount of moisture and impurities which can cause problems when it condenses in the air. For newest information you have to pay a visit internet and on internet I found this site as a finest web site for hottest updates.
There are different line tools, for example you can draw a straight line, free hand tool to draw curved lines as well as other lines with arrows on each side. The Format Shape dialog let you change the line options, including line width, color, compound type, dash type, arrow settings (begin or end), and more.


For example, you can use a different line width in order to make a thin line or a thick line in PowerPoint. Alternatively you can use other line graphics in PowerPoint to draw lines for your presentations. For example, you may use hand-drawn line pictures to make a realistic hand-drawn effect. Creating lines in PowerPoint can help you to make presentations and highlight important sections or concepts in a PowerPoint slide. Equipment - Hand Trucks - Forklifts - Dollies Readjust the Load or Your Position Before You Lift Always Get Help! If you interesting in "Hand and Power Tool Safety" powerpoint themes, you can download to use this powerpoint template for your own presentation template. Wrenches, including adjustable, pipe, end, and socket wrenches shall not be used when jaws are sprung to the point that slippage occurs.
Employees and employers have a responsibility to work together to establish safe working procedures. Floors should be kept as clean and dry as possible to prevent accidental slips with or around dangerous hand tools.
Some examples: Using a screwdriver as a chisel may cause the tip of the screwdriver to break and fly, hitting the user or other employees. Employers should caution employees that saw blades, knives, or other tools be directed away from aisle areas and other employees working in close proximity.
Where this hazard exists, spark-resistant tools made from brass, plastic, aluminum, or wood will provide for safety. With enhanced tool performance comes the responsibility to address power-tool safety issues. There are several types of power tools, based on the power source they use: electric, pneumatic, liquid fuel, hydraulic, and powder- actuated.
Among the chief hazards of electric-powered tools are burns and slight shocks which can lead to injuries or even heart failure. Gloves, if kept clear of rotating parts, and safety footwear are recommended during use of electric tools.
Before an abrasive wheel is mounted, it should be inspected closely and sound- or ring-tested to be sure that it is free from cracks or defects. The spindle nut must be tightened enough to hold the wheel in place, without distorting the flange. Because of their handiness and application to a wide range of jobs, drills often receive heavy use.
A tool retainer shall be installed on each piece of utilization equipment which, without such a retainer, may eject the tool. Safety clips or retainers shall be securely installed and maintained on pneumatic impact (percussion) tools to prevent attachments from being accidentally expelled. Working with noisy tools such as jackhammers requires proper, effective use of hearing protection. Screens must be set up to protect nearby workers from being struck by flying fragments around chippers, riveting guns, staplers, or air drills.
Several basic guidelines should be followed to insure efficient and continued operation of the compressor.
To ensure the best connection, clear any dirt off the nipple before connecting the air hose to the tool.
In PowerPoint you can draw lines in the same way you do while inserting shapes in PowerPoint. You are welcome to create lines by using PowerPoint shapes, that let you edit the line properties easily. Problem-Finding (Discovering a suitably fuzzy problem, full of opportunity or need for unusual and novel solutions and approaches). If you are conducting a glide approach you must consider approaching at a higher speed which will provide the lift energy necessary for the larger than usual round-out to.. Mitigation vulnerability, types of emergencies that might occur Preparedness resource stockpile Response triage, reporting Recovery restoring essential..
Barriers: The group identified a number of barriers to success including limited resources and lack of national standards.
With lyric pages, you may want to add some graphics to cue the words for your slower readers. For viewing only, you can play with our flash based presentation viewer instead of downloading the ppt file. Impact tools, such as drift pins, wedges, and chisels, shall be kept free of mushroomed heads.
If a hazardous situation is encountered, it should be brought to the attention of the proper individual immediately. If a wooden handle on a tool such as a hammer or an axe is loose, splintered, or cracked, the head of the tool may fly off and strike the user or another worker.
A lower tensile strength means the metal has less strength or resistance to tearing apart when stretched under test conditions. Maintenance management professionals and technicians responsible for specifying and using power tools have a responsibility to check out a tool’s safety features, then ensure that manufacturer safety precautions and common sense are followed at all times.


The user and the tools are protected in two ways: by normal insulation on the wires inside, and by a housing that cannot conduct electricity to the operator in the event of a malfunction. Choosing the wrong accessory or using an accessory incorrectly can result in serious injury.
Unplug tools before installing, adjusting and changing any accessory or attachment of any kind. The main one is the danger of getting hit by one of the tool’s attachments or by some kind of fastener the worker is using with the tool. When using pneumatic tools, employees must check to see that they are fastened securely to the hose to prevent them from becoming disconnected. Under the Insert ribbon you can see Shapes menu and under this menu you can see many line options. There are other ways you can create lines by inserting pre-designed line pictures and shapes in PowerPoint.
When you press the power button on your remote control, your devices will automatically be powered on and will automatically switch off when you are finished with your equipment. Bush was running for president, he stood foursquare in defense of each person's medical, financial and communications privacy. The wooden handles of tools shall be kept free of splinters or cracks and shall be kept tight in the tool. It also means that these tools are softer, wear down more quickly than ordinary steel tools, and have to be dressed more frequently.
They should understand the potential hazards as well as the safety precautions to prevent those hazards from occurring. Disconnect tools when not in use, before servicing, and when changing accessories such as blades, bits and cutters.
Care must be taken to assure that the spindle wheel will not exceed the abrasive wheel specifications. Don’t wear loose clothing, jewelry or dangling objects, including long hair, that may catch in rotating parts or accessories. Eye protection is required and face protection is recommended for employees working with pneumatic tools. Hose and hose connections used for conducting compressed air to utilization equipment shall be designed for the pressure and service to which they are subjected. A short wire or positive locking device attaching the air hose to the tool will serve as an added safeguard.
When the tool is connected, check the hose and all connections for leaks or damage before using the tool. Impact tools such as chisels, wedges, or drift pins are unsafe if they have mushroomed heads. Due to the possibility of a wheel disintegrating (exploding) during start-up, the employee should never stand directly in front of the wheel as it accelerates to full operating speed. When you start the saw, allow the blade to reach full speed before contacting the workpiece. When installing or changing a blade, be sure the blade and related washers and fasteners are correctly positioned and secured on the saw arbor. Before starting a circular saw, be sure the power cord and extension cord are out of the blade path and are long enough to freely complete the cut. When making a partial cut, or if power is interrupted, release the trigger immediately and don’t remove the saw until the blade has come to a complete stop. Filters, regulators, and lubricators should be used to keep the air system working at its best. A sudden jerk or pulling on the cord can cause loss of control of the saw and a serious accident. Is the speed marked on the blade at least as high as the no-load RPM on the saw’s nameplate? Be sure to use the proper size air hose and fittings to keep air pressure at a maximum throughout the entire line.
Forcing the drill can cause the motor to overheat, damage the bit and reduce operator control. Construction Tool Precautions Make sure power tools are properly grounded or a€?double insulated.a€? Inspect power cords prior to each use. Chainsaw safety boots and chaps, protect the feet and legs in the event of accidental contact . Foot Protection If the worker uses a chain saw, boots must be cut resistant that will protect against chain saw contact.
The tree worker safety training program is a computer-based training program designed as a series of hazards awareness workshops targeting small landscaping businesses.



Best cordless drill 2015 uk yorkshire
Electric powered hand saw kits
Table saw blades sizes of




Comments to «Hand power tools powerpoint presentation»

  1. Death_angel writes:
    Reduces operator stress and fatigue additional tool to my shop anytime quickly the only.
  2. sweet_fidan writes:
    Saw, I dismantled my homebuilt, but ??a blade, pliers, bit.


2015 Electrical hand tool set organizer | Powered by WordPress