Ultimate survival tips gerber viewer,kitchen garden plants for sale,grow food uk ltd,emergency sandbags somerset - Videos Download

10.12.2014 admin
The Gerber LHR is designed for use in urban warfare and really anywhere you might need a reliable knife in close quarters.  The LHR is the successor to Gerber’s popular Mark II.
These men studied hundreds of hand-to-hand combat scenarios and developed a hybrid tactical knife and sheath system that is designed to give you an advantage when your life depends on it… and ensure that your blade is not used against you!
Just looking this knife… you can tell that it is well designed and made with a high degree of craftsmanship and care. Since the knife is full tang construction the durable rubber, textured grips are pinned to the handle. This handle is well designed and very ergonomic, and with the contoured finger cut outs, hand guard toward the blade, and grip flair at the butt-end, this knife is not likely to slip out of your hand regardless of the weather conditions or the intensity of the moment. As I mentioned, there is a solid steel hand guard toward the blade that will protect your hand during a fight. The Gerber LHR knife features a serious, 440C, stainless steel, drop point blade that is pushing 7 inches. The blade is coated with a black matte finish that prevents reflection when you don’t want to be seen.
One of the hallmarks of the this knife is it’s innovative, quick release sheath system with safety lock.
This is serious sheath system that is designed so that ONLY the wearer can extract the knife from the sheath in close quarters. This sheath and knife combo is crafted with such precision that there is no give or play to the knife while in the sheath. There is an elastic strap with a quality snap that holds the handle against the back of the sheath, however it is not needed to keep the knife in the sheath.
Because of the LHR sheath and knife design, the knife only goes into the sheath one way and is designed for right hand carry only.
Honestly, I think it may be impossible to remove the Gerber LHR knife from the sheath with your left hand, or for anyone else to remove it  unless they came up from behind you and knew how the safety lock worked, which is unlikely. Donning the knife is easy enough with the sheath strapped to your leg when your adrenaline is NOT pumping, but you’ll have to decide whether it takes a bit too much fine motor skill to remove the knife when the action is hot and heavy. That being said, if you are a seasoned soldier and keep your head in combat, this knife will give you the added comfort of knowing that there is no way your enemy is going to be able to take your knife off of you in a fight. The Gerber LHR comes with a versatile carry system including one of the nicest leg straps that I have ever worn.
The sheath offers nearly unlimited carrying options and is designed for securing to your belt, pack or vest, however the fact that there is only ONE way to remove the knife from the sheath, and that it must be removed with the right hand, will likely limit you to a few favorite options like a belt and chest carry.
Once I figured out how the thumb locked worked, extracting the knife from the sheath was a breeze. If you absolutely can’t stand the thumb lock mechanism, it CAN be removed, but I don’t recommend this. That being said, the side benefit of this very secure safety release is that whether you are a tactical professional, avid hunter or occasional backpacker, you’ll never have to worry about this knife being dislodged from your sheath and lost on the trail regardless of how you carry it.
And some tactical professionals complain about the Gerber LHR knife being made of 440HC stainless because it may not hold an edge forever. 440HC is formulated to easily sharpen to a razors edge, have a high degree of resistance to rust  due the the high chrome content and the steel is tough being designed to NOT snap under heavy use if you should ever need to use it as a utility or survival knife.  Where many steels that may hold an edge better are a real bear to sharpen and have a tendency to snap when used in extreme utility or survival situations.
The Gerber LHR lists for a pretty reasonable $154, but better yet, it can be had online for just shy of 100 bucks. The Gerber LHR knife is NOT for the faint at heart and those who want an wimpy utility or survival knife.
Also, if you want a knife that can be unsheathed without any fine motor skills, look elsewhere.
All this aside the Gerber LHR is for the tactical or combat professional who wants an advantage in a hand-to-hand combat situation without the worry that his weapon will be used against him. The LHR is also a great choice for hunting, camping, backpacking, impressing the guys… or for anyone who wants to have the biggest, coolest looking knife on the block, while having the peace of mind that you own a serious blade that will serve you well if your life ever depends on it.
Whether you’re stranded in the wilderness, down behind enemy lines, caught in a natural disaster, or just out for an overnight camping trip with your family… a good survival knife can tip the scales in your favor and turn a potential disaster into a memorable adventure. This blade is one of the most popular, military spec survival knives in recent history that’s available to the general public.
Gerber Legendary Blades has been designing innovative knives since the 1930s and is based in Portland, Oregon where they also manufacture many of their knives… including the LMF II.
Although this knife my be a little much for casual, everyday carry in a non-survival situation… you’ll be really glad you have this beefy knife if disaster or emergency ever strikes. Drop point blades tend to be very strong across the entire length of the knife, including the point. The LMF II survival knife also has a large flat surface area on it’s spine for mallet-assisted bushcraft. The blade is made out of 420HC stainless steel which is a good all around steel that is very resistance to rust, and is extremely tough… making it a good tool for chopping, slicing, hammering, prying and digging.
This steel is wear resistant and very good, but not great, at retaining an edge with heavy use.
Fortunately, Gerber integrated a sharpener into the sheath to help you stay on top of keeping the knife sharp. The blade is coated in black oxide for a low visual signature and additional corrosion resistance.
I get a lot of comments in my reviews from people who just don’t like serrated blades… mostly because they find them hard to sharpen when dulled. You need a diamond sharpening rod like the one found on the Smith’s Pocket Pal or the Bear Grylls knife sharpener.
The handle of the Gerber LMF II survival knife is very grippy and has a rubberized feel… unlike the SOG knives that have a harder composite handle. Toward the butt-end of the handle… the grip curves out nearly a half inch to cushion pounding and prevent slippage.
This butt end flair also makes chopping with the LMF II knife easy because you can comfortably wrap your thumb and forefinger around the bottom of the handle to make a natural chopping motion to chop small trees and shape wood. Quite honestly, I was surprised at how easily the Gerber LMF II knife pierced through the car window. The Gerber LMF II knife is a unique, three quarter tang construction… because the knife was originally designed as an aircrew survival knife. One requirement of the knife design was to insulate the handle to prevent aircrew from being shocked if they intentionally or accidentally cut through live wires while freeing themselves from their aircraft.
Gerber developed a tough, nylon substrate injection molding process that locks both blade and butt cap together, while electrically isolating the butt cup from the blade. This LMF II survival knife has proven to be a durable performer for several years now and has been extensively used tested by troops in the field, which should settle the argument as to whether the LMF II’s three quarter tang construction is tough enough to survive in a real-world military environment or not. For added comfort for any skeptics that are left out there… Gerber stands behind the craftsmanship of the LMF II knife with a Lifetime Warranted. The Gerber LMF II survival knife is firmly held in it’s sheath using an friction lock system. The low profile handle is held tight against the sheath with two straps that secure with snaps.
The sheath has an integrated V type sharpener that is accessible by releasing a few sheath straps… and is handy for keeping your blade sharp in the field. The LMF II Survival and ASEK models ship with a high quality safety knife and strap cutter that comes in a nice MOLLE compatible sheath. And in our opinion, this knife design deserves the best steel possible (although we realize that this would immediately hike the price point up considerably). The LMF II was originally designed using 154CM stainless, which is used in the Gerber Silver Trident and several of Gerber’s other top military and tactical knives. The best pricing that I have found for the LMF II knife online is around $70 for the Gerber LMF II Infantry and Survival.
For your convenience I have provide links to the Gerber LMF II survival knife and the other knives and gear that I’ve mentioned, throughout this review.
The LMF II is a great knife for camping, hunting, hiking, backpacking, back county adventures, military operations, disaster preparedness and for anyone who wants a troop tested, proven knife that is designed for the widest variety of emergency and survival scenarios. If you want a very capable, versatile and less expensive survival knife for camping, hiking and general preparedness… check out the Gerber Bear Grylls Ultimate Knife, which now comes in a non-serrated version. Both the Gerber Prodigy and the Gerber Bear Grylls Ultimate Survival Knife have design features that were borrowed from the Gerber LMF II ASEK. This being said, the Gerber LMF II survival knife is a rugged, reliable and versatile survival knife that is designed for the widest range of potential survival situations. I hope this review has been helpful to you and has brought you a step closer to discovering the gear you need, to be prepared for any future: emergency, crisis or survival situation that may come your way. Can the Bear Grylls Ultimate Survival Knife be placed into the Gerber LMF II Knife Sheath, and does the LMF II have a striker pad for fire starting like the BG ultimate knife?

Thoughtful use will do a lot more for edge retention than a few more points on the Rockwell scale will, any day. Question: Would you consider this more being a survival knife or could this also be qualified as a Tactical knife? I was all set to buy one of these until I saw the part in the video where I found out the blade and butt are not connected and is not a full tang knife. As a Navy Hospital Corpsman I can say it was always handy and held an edge well in the field. Gerber has been around for over 70 years and already has a huge presence in the world of knives. But, honestly, with all the vintage bad press and assorted opinions lingering online… I didn’t expect much from this knife. However when my Bear Grylls knife arrived, I must say that I was quite surprised with the look, feel and overall quality. My only initial complaint… was that the knife was a bit tricky to get out of the package without slicing into the knife handle or cutting the pocket survival guide which is on the back side under the knife. The Gerber Bear Grylls is a medium sized survival knife with an overall length of 10 inches and a blade length of 4.8 inches, which makes it slightly larger than the Gerber Prodigy and a little smaller than the Gerber LMF II ASEK. The Bear Grylls knife sports a drop-point, fixed blade that is made of high carbon, stainless steel, that is similar to 440B stainless. The drop point blade design is known for providing strength across the entire length of the knife and for good edge preservation.
The knife is made in China, unlike the Gerber Prodigy and LMF II ASEK, which are made in Gerber’s Portland Oregon facility. I did not sharpen mine right out of the box and was very happy with the blade… but then again, I did not gut or skin any game with it.
Like most survival knives today… the Bear Grylls Ultimate Survival knife goes from a fine to a serrated edge toward the handle. Serrated blades like this are somewhat saw-like and can cut through a much wider range of materials like, rope, wood, wire and even sheet metal in a pinch. The knife held a nice edge in my torture testing… but after an afternoon of heavy use which included throwing the knife for about a half hour with a reasonable number of drops, the fine and serrated edges needed touched up. Some folks don’t like the serrated edge of the Bear Grylls knife, so Gerber responded by coming out with the Bear Grylls Ultimate in a fine edge (with no serrations). However, if you want added cutting power and don’t want to fuss with sharpening your blade as much, I recommend the serrated version. The handle of this knife is made of a special injection molded plastic that is covered with a durable, textured rubber. Owners report that the handle is comfortable for extended use without blisters and has a good grip even in changing conditions. The handle made it easy to use the Bear Grylls Ultimate Survival knife to cut, slice, pound and chop. With the butt-end of the handle a bit wider it was natural for me to wrap my fingers around the butt-end of the handle to chop. Much like the Gerber LMF II ASEK… the Bear Grylls Ultimate knife also has three strategically placed holes in the handle for lashing this knife to a pole to extent it’s use as a spear.
Then I had some fun throwing my spear at trees… the holes in the handle are well placed for lashing. There is a stainless steel pommel at the butt end of the handle that is design to hammer, pound, break and smashing things. The knife comes with a very sufficient sheath that is made out military grade, mildew resistant nylon. A real nice bonus of this sheath and knife is diamond sharpening stone that is built into the inside of the sheath. This sharpener will do a good job at touching up the fine edge of the knife but won’t help you out when it comes to sharpening the serrated edge. One cool innovation that is included with the Gerber Bear Grylls Ultimate Survival knife is a fire starter rod that locks firmly into the bottom of the sheath. So this fire starter is a welcomed addition that is both durable and well designed with a solid handle. To Start a Fire… Angle the blade slightly and strike the rod to generate sparks in any weather condition. A small but loud emergency whistle is incorporated into the lanyard at the butt end of the knife.  This is a nice feature if you are in trouble or injured, allowing you to make your position or situation known. Honestly, one of the first things I did was take my whistle off because it quickly got in the way of my testing. Regardless, the whistle is a nice bonus item that is well built and could come in handy in a pinch.
A pouch is sewn into the back of the sheath which holds is a basic survival guide that was put together by Bear Grylls. This guide may be the most important bonus offered with this knife because it will aid anyone, even the most inexperienced explorer, in staying alive in a wilderness survival situation. For a knife comparable in quality, style and design to the LMF II ASEK it’s amazing that it’s street price is around $50 on Amazon. Reviews for this knife usually average over 4 out of 5 stars… this is really pretty astounding considering all the bad reviews that are factored into the equation for it’s early pommel issue.
We rate this knife at 4.0 out of 5 stars for value, quality of design, innovation and getting such a great survival knife package to the masses at such an affordable price point! Well… the Gerber Bear Grylls ultimate survival knife is a great choice for camping, hiking, backpacking, hunting, emergency preparedness, home security and general peace of mind. I remember the first reviews about the knife and was happy to read that Gerber had fixed the problem.
I think you might like the BG Ultimate Pro which has a full tang construction….review is coming up soon! The Gerber Bear Grylls Pocket Tool is designed to be a bare bones, folding, every-day-carry, pocketable multi-tool that sports a few basic components including a fine-edge blade, bottle opener, Phillips head, medium and small flat head screwdrivers and the Bear Grylls Priorities of Survival pocket guide. This tool does not come with a sheath or belt clip as it is designed for carrying in your pocket, bag or pack. Now, the Swiss Army Tinker is a little longer, about the same width and quite a bit thinner than the Bear Grylls Pocket Tool. Like the Swiss Army Tinker, the guts of the BG Pocket Tool are supported by an internal, stainless steel metal frame that is covered over in what feels like a pretty durable molded plastic. Then on both exterior sides of the Pocket Tool, there is a rubberized, raised gray grippy material that is common to tools in the Bear Grylls line. Now when I pocket tested the Bear Grylls tool versus the Swiss Army Tinker, the Tinker was a LOT less noticeable due to being a third less heavy, and quite a bit thinner than the Pocket Tool. Neither were uncomfortable in my pocket… but the Bear Grylls tool was quite a bit more clunky feeling until I forgot it was in my pocket. I fear that if you whack on the spine of this blade, I think you could break the thumb stud off and then it would be a bit challenging to open the knife since there is no thumb nail groove. I’ll have to admit… because of the strength of the internal spring locks, and the mid-tool positing of the thumb notch, my wife and I both had a hard go at opening this screwdriver. On the Tinker, there is a smaller flat head screw driver combo at the tip of a very functional can opener. Many owners love the low weight, yet thicker, sturdier feel of this tool compared to other tools like Swiss Army knives. We took off a star and a half because this tool is hard to open, it is a bit bulky and it would be nice if it had a few more tools built in for survival.
This tool is a solid, pretty good quality tool… for everyday carry in a pocket, pack or bag. That being said, the Bear Grylls Pocket Tool is a pretty good value for the suburban Bear Grylls fan with strong finger nails, who wants a dependable, helpful, and low cost, bare bones, EDC tool in their pocket at all times. If you’d like a more full featured pocket tool and don’t mind paying a few extra bucks… look at the Swiss Army Tinker.
For a very nice, small and light weight single blade pocket knife, check out the Bear Grylls Compact Scout Knife. And if you’d like a classic, high quality, three blade and super small pocket knife similar to the one your Grandpappy used when he was your age… check out the Schrade, Old Timer, Junior pocket knife. Hi David I have got the bear grylls knife and so far I love it I use it for everything but killing and that bad stuff. I can guess David would say that it all depends on the tools you would personally use and find purposeful. The knife was designed Matt Larsen, Chris Reeve and Bill Harsey and was named using the first letter of each of it’s designer’s… last names. The knife was made of 440HC and is now made of 440C stainless steel and features full tang construction… Full tang knives are known as the strongest because the blade and handle are all one solid piece.

That is, once I read the directions and figured out how to get the knife out of the sheath… haa, haa. I was impressed with how substantial, solid and comfortable the knife felt in my hand, and honestly, I was overcome with the beauty of this knife and sheath package. Those with large and small hands will find this knife very comfortable to use with or without gloves.
The bottom end of the hand guard has a bit of a hook that could come in handy in close quarters as well as a nicely pointed punch at the butt end. Drop point blades are strong across the entire length of the blade and are designed for edge retention. Toward the handle there is 1 inch of serration to increase the blades usefulness as a utility knife. The knife is easily and quickly removed from the sheath by first unsnapping the handle strap, grasping the handle with your right hand while pushing down on the thumb lock.
Folks love the design, the blade size, the craftsmanship and the versatility and beauty of this knife. Io di solito consiglio acquisto poeple attraverso Amazon – non so se si puo fare in Italia.
However this knife will loss surface black coating after many times in and out of the sheath. Please Consider Partnering with Us to Keep Our FAMILY FRIENDLY Videos (and Website Content) Coming YOUR Way. The only differences in the various models and SKUs are the knife handle and sheath colors… and the accessories that ship with each model.
Usually a few strokes is all it takes to restore a banged up serration to full cutting power. The leg straps are about an inch and a half thick and include a section of elastic to keep the sheath tight against the leg. Owners of this knife seem to run the gamet from first time knife owners to active military. Many say this is the best knife they have ever owned and love the versatile, thick strong blade.
Some feel it is a bit heavy for carrying all day but understand that the weight of the Gerber LMF II survival knife is a tradeoff for a blade of this caliber.
420 HC is a good steel for blade retention and a GREAT steel for general purpose strength and durability… but it’s not the best steel. To make the LMF II more affordable for you and I, Gerber eventually settled on 420 HC stainless. The ASEK may cost you a little more, if you can find one and is usually only available to credentialed military or tactical personnel.
Since it is a smaller blade is does wiggle around in the sheath a bit and the handle straps are a bit looser… but it does fit. Also if I was to buy a BG fire striker which one fits more securely in the LMF II Sheath, the longer or shorter one? Its called Camillus Les Stroud series, could you give it a review if you have some spare time?
Simple answer to your question is that the blade is going to resist corrosion because it is considered stainless steel, plus it is coated, so with care, you should have limited risk of corrosion.
However the knife still carries Gerber’s Lifetime Limited Warranty and I guess being made in China is the tradeoff for getting a knife of this caliber at such a low price point.
Best of all, a serrated blade will often keep cutting long after your fine edge is quite dull. It felt very good in my hand and is well balanced so that there is very little hand and wrist fatigue during use.
Chopping is made even easier because of the placement of the serrated edge… and the mass of the blade. I used this knife in conjunction with the Bear Grylls Scout… folding survival knife for my little bushcraft experiment.
Even after over fifteen minutes of use and abuse the knife was still tightly attached to the pole.
This problem was not good for the initial reputation of the knife since some owners reported the pommels falling off even after initial use. Owners also report “beating the tar” out of the pommel and the Bear Gyrlls Ultimate Survival knife in general taking the abuse quite well. The knife is held firmly in place with an innovative and simple friction thumb lock mechanism. I was surprised at the tight, precision fit of the rod in it’s storage port and the overall quality of this tool. Some will want to remove the whistle and lanyard as they will have a tendency to get caught when moving through thick brush or densely wooded areas.
It’s a real tight fit so it’s not going to slip out and get lost, but you’ll have to work at it to get it to fit in the pouch. My wife and I love to camp and she was looking for a knife to have on her while we’re adventuring in the Mountains of Colorado so I did some research and decided on this one. Neither the service provider nor the domain owner maintain any relationship with the advertisers. I will say that the chunkiness of this tool and the grip material make it feel pretty good in my hand, when I forced myself to think about it… where the Swiss Army Knife could much more easily slip from my hand due to its very smooth, glossy surface.
Many comment on this tool being perfect for every day carry and use and the fact that the knife takes and keeps a nice edge. We really like what you get with the Swiss Army Tinker for just a few more bucks like the additional blade, can opener, reamer punch and the tweezers… and I personally like the thinner, lighter feel of the Tinker in my pocket. It’s a helpful tool for around the house, at work and for day hikes, backyard camping and for responsible Scouts, Bear Grylls fans and for anyone who might need a good quality knife and a few screw drivers that you can pack and carry in your pocket. IMO one feature of the Swiss Army knife that appeals to me are the tweezers believe it or not. The butt-end pommel will come in handy if you have to break things like glass or bone when dressing big game. Both top and bottom edges of the LRH slope and converge at the point to increase the knife’s ability to pierce.
It will fit well around small, medium and larger thighs and has 6 rows of raised rubber bumps that run the length of the strap to prevent slippage. Yes, sharpens easily with good edge retention, but I can tell you from experience that it may not survive some of the uses the LMF-II was envisioned for. 12C27 was comparable in toughness (durability in rough use) and hardness (edge retention) to 440A and was a very good steel choice by Gerber. I’d also prefer a better grade steel like the VG-1 San Mai on my Cold Steel SRK or S30V like my Gerber Mark 1. Wild’ TV show to put together a hybrid survival knife that is priced low enough to make it hard for a millions of Bear Grylls fans, and the rest of us, to resist. The knife is three quarter tang construction (similar to the LMF II ASEK) which means that this knife should endure just about any abuse your can throw at it. It makes quick work of touching up your blade and has an elongated, cone-shaped sharpener that makes it easy to sharpen the serrated edge of this blade.
It’s taken some abuse and now when we’re in the hills I sometimes end up wearing her knife to which she replies I need to get my own!!
In case of trademark issues please contact the domain owner directly (contact information can be found in whois).
I prefer belt clip knives, but when I do pocket carry, the Tinker is toward the top of my list.
I checked with Gerber and was told they were transitioning at the time from the logo with the mountain on it. The knife handle is kept tight against the top of the sheath through the use of a nylon strap with a Velcro closure. The sheath has taken some flack but bearing in mind it’s design was made for retention for those that work in the real world where weapon retention is important it is a brilliant design. Weapon retention is all important especially in encounters where your weapon does not need to be produced but in seconds turns into a ground rolling wrestling match.

Healthy eating tips new year wishes
Growing food god's way quotes
Wilderness survival weapons canada

Rubric: Survival First Aid Kit


  1. Love_Is_Bad writes:
    Nearly all important strategies simply place the wicking bed in a sunny spot and.
  2. Delete1 writes:
    Illness-resistant, and produce from a USDA inspected and keep in thoughts that the.
  3. ARMAGEDON writes:
    And extra recently, coconut coir vermicomposting) creates wealthy fertile worm for starting up a nitrogen.
  4. LorD writes:
    Flow, you can get away.