Small shearing shed designs,furniture storage cost,10x10 gambrel storage shed plans - PDF Review

Published : 06.09.2014 | Author : admin | Categories : Leonard Storage Buildings
Traditionally shearing sheds have been built around two main board designs: centre-board and across-the-board. In a centre-board shed the shearer catches a sheep from a pen behind the shearing stand and drags the sheep out onto the board.
The congestion caused by shearers, shed workers, sheep and wool continually crossing paths is a major fault of this design.
A raised board simplifies the work of the shed workers as well as reducing interference between sheep, wool, shearers and shed workers. The curved board is a departure from the conventional arrangement of having the shearing stands in a straight line. Several dimensions are important when setting up a shearing stand to ensure favourable working conditions for shearers. Where electric power is available at the shearing shed, independent electric shearing units are now more popular than a shaft-driven shearing plant. The minimum distance between shearing stands allowed under the Pastoral Industry Award 1954 is 1524 mm, but this is too close for efficient working conditions. 19 mm thick tongue-and-groove pine flooring is satisfactory material for the shearing board.
The shearing board flooring can be either treated with linseed oil or painted with tung oil. The aim of any let-go system is to get the shorn sheep away from the shearing board quickly and easily.
We also design and build sheep yards, cattle yards, farm sheds, machinery sheds, hay sheds, industrial sheds, and grain sheds suited to your individual requirements.


If you have a particular idea in mind for your Shed or Yards our people are able to do an obligation free quote for you. Conventional sheds have the pen area, shearing board and wool room built on the same level, but raised shearing boards have become popular in recent years. The distance the shearer drags the sheep is reduced and there is little interference between shearers and shed worker. It may be governed largely by factors such as other farm enterprises, condition and size of farm sheds and availability of a 3-point linkage jib or front-end loader for lifting bales. Sheep can enter at ground level at one end of the shed and bales can be loaded at truck height at the other.
Individual electric shearing units allow alternative board configurations where the stands can be set at any angle up to 90° to each other.
Installation of a curved board generally costs more than a straight board because of the larger shed and roof area, as well as extra time and skill required to set out the piers, bearers and joists. At each stand there should be a shelf or recessed box for shearing equipment and personal items.
Chutes, tipping chutes and return races are used in centre-board design sheds and external portholes are used in across-the-board shearing sheds. Shorn or crutched sheep are let directly out of the shed through portholes in the outside wall. A raised board minimises interference between shearers and shed workers by giving the shearers their own work area above the wool room floor.
Another advantage is the reduced walking distance for shed workers carrying shorn fleeces from the board to the wool table or press.


In high-clearance or raised-board sheds, double-angle outlet chutes may be needed to slow the rate of fall of sheep. The tipping chute consists of a horizontal counterbalanced platform which must be pivoted at the shearing-board end.
A race running across the shed behind the filling pens and exit doors must be planned carefully so that the flow of woolly sheep in the pen area is not hindered.
It also lets the shed workers pick up each fleece without bending, saving time and reducing fatigue. The design can incorporate a conventional or raised board and suits a range of board layouts.
In centre-board design sheds, the distance between stands is determined mainly by the width of the catching pen.
Counting-out pens are essential when external portholes are used to let sheep out of the shed. The cost of a raised shearing board, catching pens and sheep holding area is usually slightly more than the cost of a conventional shearing shed.
If these pens are outside the shed it is advisable to make the fences about 900 mm high to prevent shorn sheep jumping out.
Alternatively, it may be locked in the horizontal position for returning sheep back onto the grating through a small gate.



Grape arbor blueprints
Wood sheds ct
Wood craft plans simple


Comments »

  1. HANDSOME writes:
    Your constructing from any areas on the diagram indicate how discovered shopping.
  2. body_love writes:
    Storage boxes are sized to fit perfectly.
  3. ALFONSO writes:
    Any woodworking venture hassle-free with detailed the scale is a pleasant 14-Inch.