Plans for making a potting bench,free chicken shed plans,12x16 storage shed building plans - Tips For You

Published : 26.08.2014 | Author : admin | Categories : Simple Woodworking Project Plans
I know this is such a simple humble plan, but wanted to get it up before the season is over! This week’s Tuesday {ten} is a collection of Potting Bench ideas which include links to the actual step by step building plans.
The plans for the Potting Center Hanging Frames can be found on Lowe’s Creative Ideas as well and would make a great addition to any outdoor space.
I bought an unfinished workbench kit from HD and have successfully used it as a potting bench. Gardeners will dig these DIY potting bench plans for increasing their outdoor garden storage. These versatile DIY potting bench plans show you how to build the entire project as shown, or you can choose to construct only the bench (lower section) or cabinet (upper section). Build the legs from 2×4 lumber and attach them to the frames as in the building plans.
Building the top shelf is a straight-forward process and it will increase the storage capacity of the potting bench. PRO TIP: Apply several coats of stain or paint to enhance the look of the potting bench and to protect it from wood decay on the long run.
A strong sturdy base, spacious top, and a dedicated home for all of the pots, tools and garden essentials.
The wooden slots on work surface are great for recycling excess potting soil and the hardware cloth back is a nice touch for hanging tools. The plan states that the cuts and assembly are fairly simple – even though there are a lot of pieces to put together. The shelf cut outs for pots not only add a decorative touch but are a fun way to display herbs or flowers.
The top shelf and back slats provide some space for extra storage and I like the idea of adding inexpensive hooks along the countertop edge for hanging tools.

Do-it-yourselfers can build the potting bench only, or keep hammering and finish it with a garden storage cabinet. These practical DIY potting bench plans are among the 76 ingenious ideas offered in his DIY guide The Backyard Homestead Book of Building Projects. If you build both the table and the cabinet, your potting bench will be 80 inches high, 84 inches wide and about 29 inches deep. Building a potting bench with a sink is a must have project for any amateur gardener, as it will make your work a lot easier and save you precious time. Attach pegboard panels to the back and to the sides of the potting bench, if you want to enhance the look of your woodworking project.
Therefore, fill the holes with wood filler and let it dry out for about one hours (read the manufacturer’s instructions for precise information). Use a PVC water pipe to the left side of the potting bench and enjoy the versatility of your latest garden project. The soil container on this one is a simple plastic trash bin and the plans include a removable lid and sliding grate. The attached 5 gallon bucket is perfect for potting soil or fertilizer and I like the added recessed tool bin.
I have an old store bought one in my yard that is on it’s last legs and my plans for today are to give it a new life. Attach the brackets to the side legs of the potting bench, before installing the 1×4 shelves. These DIY potting bench plans will let you work at a comfortable height, and will provide a central place for stashing your hand tools and supplies.
Make sure you take accurate measurements before cutting out the hole, otherwise the sink might not fit into place easily.
See, THESE are the plans I knew could exist, not these complicated, difficult-to-read plans you see all over the rest of the internet.

The materials and cutting lists are divided into bench and cabinet sections so you can build only one component if that’s all you need.
If you’re building an outdoor potting bench, choose cedar or another rot-resistant lumber. Make the space between the leg blocks wide enough to tightly sandwich the platform and slats that will fit between.
Check to make sure the openings on the ends of the top platform will accommodate your tubs.
Make sure the platform frames are square, and then install the 1-by-6 slats (H) using 8d galvanized nails. Lay the two back legs on a solid, flat surface, and fit the bottom platform into the notches you created between the blocks.
With the garden storage cabinet still on its back and the doors in place, secure the doors to the cabinet using 3-inch hinges — two hinges per door. Install pulls for opening the doors and a hasp for keeping them shut.Join the Storage Cabinet to the Potting Table11.
With the bench on its back, position the cabinet on the back legs (A) 14 inches above the top platform. To stop the soil or potting materials in the tubs from turning into mud, save the plastic tops and snap them in place when you’re finished for the day.

Wooden shed or metal shed
Diy storage building patterns

Comments »

  1. ERDAL_23 writes:
    By Having storage cabinets you are able to set into.
  2. Voyn_Lyubvi writes:
    And that creates a pleasant impression of an old-fashioned nation personal My Shed Plans evaluation.
  3. Vertual writes:
    Polished Chrome, Matte Nickel or Oil Rubbed purposes, which.
  4. KENAN18 writes:
    Portuguese at all times believed to serve metallic, plastic or jump to vinyl save you.