Restore An Antique Rocking Chair Plans,Best Cad Software Woodworking,Make Router Table Fence - PDF Review

If there's one thing all 21st century wood-workers can claim, it's remarkably good fortune. Most PopularPlan of ActionExposure to the elements had ruined many of the glue joints in our chair, but surprisingly, some were still sound. I have attached some pictures of an old rocking chair that I would like an estimated value of after I restore it. AnswerRonnie - My guess is that the metal pan was added as a "supplement" somewhere along the line. The chair is a factory made press back rocker from the turn of the century so it is not a unique or rare chair. ExpertiseI will attempt to answer questions about American antique furniture, including construction details, style, period, manufacturers, care, repair and storage. We have the tools to make the most tedious job effortless and the trickiest joint flawless.
Two failed joints in the seat had left one of the seat boards hanging free, and most of the spindles were no longer securely held in their sockets.
Depending on the size it can be repaired with a filler such as Bondo or wood putty and colored to match the chair. I do not have any background in appliances, musical instruments, sewing machines, trunks, lighting, clocks or children's and baby furniture and will not respond to questions about those items.ExperienceI ran an antique furniture restoration business for twenty years.
And, anything from glue and lumber to paint and hardware is as close as the nearest home center or only a mouse click away on the Internet. Normally the leather or pressed fibreboard seat is tacked into place over the hole and the seat itself carries all the weight. If the dowels are broken in the joint you will have to disassemble the chair to disassemble the seat to replace the dowels.
I am a nationally syndicated columnist on the subject of antique furniture for such publications as Antique Week and New England Antiques Journal.
But most of all, we have our legacy of woodworking--hundreds of years of design and wooden construction from which to draw inspiration and on which to base our craft.Advertisement - Continue Reading BelowSometimes, though, there's a chance to do more than take from our past--we can give something back by rescuing a piece that's seen better days.


Remember to label the pieces for easy reassembly.To restore the failed seat joints, first plane the mating surfaces to provide a good fit (4).
I have produced one video on the subject of furniture identification and my book "HOW TO BE A FURNITURE DETECTIVE" is now available.I have also published articles in Antique Trader, Chicago Art Deco Society, Northeast Magazine, Victorian Decorating and Lifestyles, Professional Refinishing, Antiques and Art Around Florida and Antique Shoppe. We had the opportunity to do just that when we discovered this 50-year-old Windsor rocking chair.
Remove only as much material as necessary to avoid affecting the shape of the chair and the fit of the spindle joints.To glue the seat pieces together, first make a clamping caul by tracing the seatback edge on 2 x 4 stock (5). Even with broken joints and a ruined finish, the chair's classic lines made it an irresistible candidate for restoration.
Cut to the line with a sabre saw or band saw.Then, apply glue to the mating surfaces, and use bar or pipe clamps to hold the seat together while the glue sets. I don't recall seeing them in any catalogs and they were in original use for only a very few years around the turn of the century. Although the specific procedure we used to bring our rocker back to life might not match your restoration project, there's a good chance many of the techniques will be relevant.
Use two waxed 1 x 2 cauls at the top and bottom of the seat at each side to keep the pieces aligned (6).To repair endgrain cracks in seat-joint lines, glue thin, tapered maple wedges in place. You may have to resort to scrounging them from a junker chair if you can find one or check with local resoration shops to see if they have any. Be careful not to enlarge the holes or reduce spindle-tenon diameters.Finish RemovalBefore applying a finish remover, plug all of the spindle holes with corks (9). Protect the spindle tenons from the finish-stripping operation by wrapping them with masking tape.We used 3M Safest Stripper to remove our chair's finish.
Following the manufacturer's instructions, brush on the stripper in heavy coats and allow it to penetrate the old finish (11).
To apply stripper to the spindles, bore oversize holes for the spindle tenons in scrap stock to create a convenient benchtop spindle-holding rack (12).Remove the softened finish by gently scraping with a putty knife (13). To clean small grooves in the turned spindles, use a piece of twine that you've coated with dampened pumice (15).


Remove any remaining residue with stripping pads and soapy water, followed by fine stripping pads and clean water.AssemblyWhen the wood is dry, lightly sand the chair with 220-grit paper to remove any raised grain that can result from the application of water. We used a 3M sanding sponge on the turned members (17).Remove the cork plugs from the spindle holes and use a belt sander to carefully level the seat repairs (18). In the concave area of the seat, use a curved cabinet scraper to remove any marks or dents (19).
With the sanding completed, dry assemble the chair to check the fit of all the parts.We used Titebond Extend wood glue for the spindle assembly because of its long open time. Then, temporarily install the back cross-member, or splat, to keep the long spindles in position while the glue sets.To complete the assembly, apply glue and install the back spindles in the seat. Spread glue on the spindle top tenons and in the splat tenon holes with a small brush (22). Install the splat starting at one end and gradually tilting the other end down as you engage the spindles (23).FinishingWe used Behlen Solar-Lux American Walnut dye-based stain to color our chair. This is a fast-drying stain, so add 10 percent Solar-Lux Retarder to slow the drying time and help prevent lap marks.
Working on one area at a time, apply the stain by wiping it on with a padded cloth (24).For a durable topcoat with just the right sheen, we finished our rocking chair with three coats of Deft Semi-Gloss Clear Wood Finish, applied following the manufacturer's instructions (25). You must use the product in a well-ventilated area.Finish RemovalBefore applying a finish remover, plug all of the spindle holes with corks (9).
Packages of corks of various sizes are usually available at hardware stores.Use a hacksaw blade to trim the corks flush (10).



Free Wall Hung Tool Cabinet Plans
Woodworking Furniture Classes


Comments to Restore An Antique Rocking Chair Plans

  1. Revival architectural model of the early 1800s guide of initiatives utilizing.
  2. T_O_T_U_S_H on 19.10.2014
  3. Boys have the opportunity to create tasks from simple mirror frame that looks prefer it came from.
  4. EzoP on 19.10.2014
  5. That tricky supplied you may have.
  6. PREZIDENT on 19.10.2014
  7. Again-ordered for four weeks, and and also turnout critiques straddle-legged the.
  8. Lalochka on 19.10.2014