20.03.2015

Remove ceiling fan and install light fixture youtube,best place to buy pc fans,ceiling fan hampton bay installation instructions 1600 - Step 1

Author: admin  //  Category: Ceiling Lights


Before I give you the full tutorial for installing a ceiling fan, we need to talk about prep work and safety.
Next, if you are replacing a light fixture with a ceiling fan, you MUST make sure that the junction box is attached to a support.
Finally, you need to have a Sturdy A-Frame Step LadderA tall enough to reach 1-2 feet below the fanA during installation. Locate the hanging bracket and secure it to the stud that holds the junction box, or secure it to the junction box if it is bolted to a ceiling fan brace.
Wiring with the receiver is a little more work because you are creating moreA connections, but it’s just as easy to do.
Next, attach the white neutral wire from the ceiling box to the white wire from the receiver.
Installing the fan blades on the Caneel Bay are a little tricky, but once you get one blade assembly screw and nut attached it moves quickly. For rooms measuring 76 to 144 square feet, choose a fan with a blade diameter of 36 to 42 inches. For rooms that are 225 to 400 square feet, use a fan with a blade diameter of 50 to 54 inches. When installed, the fan blade tips should be at least 30 inches from the walls and other obstructions.
Turn off power to the existing fan or light at the main fuse or circuit box and use a circuit tester to verify the power is off. CautionIf you plan to control your fan with a wall switch, make sure you have the right switch. Good to KnowIf your electrical box has wiring for separate fan and light switches but you aren't installing a light with your fan, trim off the bare portions of the wires for the light. If you're installing a new electrical box, fasten it to a ceiling joist or a 2 x 4 wood brace between two ceiling joists.
Good to KnowInstallation on angled ceilings may require a separate downrod and an angled mounting kit. For a fan with a downrod, thread the wires through the canopy trim ring (if applicable), canopy and downrod. For a flush-mount fan, thread the wires from the fan motor through the top housing, trim ring (if applicable) and canopy. For a downrod installation, insert the downrod into the collar yoke on the fan motor and secure it to the motor assembly as the manufacturer instructs. For a flush-mount installation, attach the top housing, trim ring (if applicable) and canopy to the fan motor assembly.
Fans that work in either downrod or flush-mount applications may need additional adjustment to convert them for a flush-mount installation. CautionUse pliers, a wrench or a screwdriver to secure the fasteners that hold the downrod to the collar yoke. If there is no hook or downrod, have a helper support the fan while you follow the steps below. Good to KnowSome fans come with a support cable that wraps around and fastens to the brace in the ceiling that supports the electrical box. Use wire connectors to join the wires according to the fan manufacturer's instructions.
Good to KnowSecure the wire connectors with electrical tape to prevent them from vibrating loose during operation.
Tuck the wires into the electrical box, keeping the green wires and white wires on one side of the box and the black wires on the other side.
Good to KnowIf your fan includes a light kit or if the installation site has separate wiring for a light switch, you will have additional wiring. Good to KnowSome fan kits include grommets you need to install in the blade mounting holes before attaching the blades to the brackets. Remove the switch housing cover plate from the fan and remove the plug from the center of the plate.
Feed the light kit wires from the light kit through the hole in the cover plate, and screw the plate tightly to the light kit to prevent it from vibrating loose. Good to KnowIf you use wire connectors rather than plug-in connections, secure the wire connectors with electrical tape to prevent them from vibrating loose during operation. You can also check to make sure the blades are all mounted at the same height from the floor. If the fan still has a wobble, you may be able to correct it with a balancing kit — included with many fans. Installing a new ceiling fan is a thrifty way to reduce your energy bills without sacrificing comfort. Once you gathered the necessary tools and materials, follow the steps below to install the fan outlet box. Insert the support brace into the opening in the ceiling and position the brace between the nearest two joists. Installing a ceiling fan is not difficult, but it may take a few hours to complete based on the fan type and your home improvement experience. Connect the grounding wires from the ceiling, downrod, and hanging bracket with a wire nut.
Slide the canopy up to the mounting bracket and align the holes in the canopy with the screw holes on the bracket.
Screw two housing assembly screws into the motor housing (it does not matter which screw holes you choose).
Using a ceiling fan with your air conditioning and heating system reduces energy consumption and increases utility bill savings. If you already have an existing ceiling fan installed, your job is generally straightforward.


We’ll assume you have a room with a light already overhead, and now you want to swap it out with a new ceiling fan. Unfortunately, unless your house was built to accommodate a ceiling fan in this spot, you’ll need to upgrade both the support and light box here for your new ceiling fan. If the hole in your ceiling is not directly below a ceiling joist, then you’ll need to install a ceiling fan brace made for fan lights. Now, attach your ceiling fan mounting plate using the provided nuts and bolts, and run the wires down through that.  When you attach your new fan, be sure to follow your particular ceiling fan directions closely. Be sure to use the metal hooks on the mounting plate to rest the fan assembly on while you wire your ceiling fan.
Attaching a Ceiling Fan - How to Install a Light Fixture or Fan - Home & Residential Wiring. Although a ceiling fan is a complex fixture with lots of parts, each step of installation is fairly simple. Carefully lift the assembled fan and hook the ball-like end of the downrod into the mounting bracket. In this arrangement a standard single-pole switch turns the fan and the light on and off at the same time. If you installed a fan only, with no light kit, a push-button fan control operates the fan at different speeds. A two-wire cable brings power to the switch and three-wire cable runs from the switch to the fixture box. Some manufacturers (Hunter for example) now recommend the fan mounting plate be screwed directly into the joist. First, do not attempt any electrical projects until you have turned off the power to the fixture you are working on. And having an assistant who can hand you the motor when it’s time to hang the fan is definitely a bonus. If you are working on a porch with slats, lay down a blanket under the ladder to catch them. All ceiling fans are different, but most require removing the light kit before you can get access to the fan blades and motor. You will want to attach the wires together with a wire nut and then wrap part of the bare wire around the ground screw attached to the mounting bracket. And finally, attach the additional power wire (usually red, but can be black or striped) to the blue wire (this color may vary) from the fan. It is good practice to put the white neutral wires on the opposite side of the box as the red and black power wires.
Attach the white wires first, then the black and finally attach the two blue wires together with aA wire nut. Connecting them is super easy, just line up the colors and snap the wiring harness together and make sure it is secured.
We have switched outlets in most rooms and no overhead lights, but I’d like to install ceiling fans in a couple bedrooms. I think this is the first fan installation article in I’ve seen with this much detail. I think those of us that live in warmer climates know that we just can’t live without ceiling fans.
Keep an eye out for fans with the ENERGY STAR® logo, and enjoy even more energy savings. If there isn't a suitable joist or brace available, but you have access to the framing through the attic, add a brace that can support the fan.
If your electrical box is a thin, pancake-style box, separate and tuck the wires into the fan canopy. Connect them to the wires from the light kit according to the fan manufacturer's instructions. Depending on your light kit, you may need to attach light shades before installing the bulbs. A fan installation is a perfect weekend project for any avid do-it-yourselfer because it only requires a few hours to complete, and the payoff is immediate. The right location ensures your safety as well as the fan's performance and efficiency. If your fan weighs more than 50 pounds when in motion, you will need a heavy duty brace for additional support. If removing a light fixture, uninstall the fixture in following order: glass fitters, light bulbs, canopy, and mounting bracket.
Separate the wire connections, with the grounded wires on one side of the outlet box and the ungrounded wires on the other side of the box. Connect the two green wires from the outlet box to the grounding wires from the wall control.
Spread wire connections apart, with the grounded wires on one side of the box and black wires on the other side of the box. Feed the wire supply through the center hole of upper switch housing, then wrap the keyhole slots around the screws and twist counterclockwise to lock into place. Lift the lower switch housing up and line up with the screw holes in the upper switch housing. While you have to remove the old fan assembly and light kit, you should be able to use the existing light box, ceiling fan wiring and be reasonably certain that your ceiling can support a ceiling fan. Installing your new fan should more or less just be the opposite of what you did to remove your old fan and light kit. After you’ve ensured the power is off to this room, remove any globe or light fixture cover, simply take out the mounting screws of your old light. As long as your fan blades are at least 7′ from the floor, you may not need the downrod.


Black (hot, lead) wires connect to black wires, and also to blue or striped wires if your ceiling fan comes with a light kit. Push the canopy against the ceiling and secure it to the mounting bracket with the provided setscrews. With more expensive ceiling fans, switches are available that have separate controls for the fan and the light, though they require only two-wire cable. For this reason, I was truly excited when Casablanca contacted me and asked if I wanted one of their new ceiling fans. I like to turn on the fan and light (they are often on two different power lines) and then shut off the power. Or in the case of the Casablanca fan, attach the green and yellow striped wire (from the hanging bracket) to the green wire from the fan and the ground wire from your ceiling box.
Regardless, now is your chance to enter to win the Casablanca ceiling fan of your choice + have your room repainted! We have plans later on down the road to put one in our living room and maybe another bedroom too.
Once you select a fan, check the included documentation for any additional requirements for blade clearance or ceiling height. Don't use the fan with any solid-state speed-control device, dimmer or variable-speed switch unless it's specifically designed for use with a ceiling fan. Except for the bare or green ground wire, no bare wire or wire filaments should be visible outside of the wire connector after connecting the wires. Some manufacturers simplify the electrical connections between the fan and light kit with plug-in connections. If removing a ceiling fan, uninstall the fan in the following order: light kit, fan blades, canopy, motor assembly, and mounting bracket.
Guide the outlet box through the opening in the ceiling and align the box with the u-bolt brace. If your fan includes a reverse function, confirm the fan blades spin in the opposite direction by reversing the airflow. Remember, you may sacrifice a few hours to install a ceiling fan, but the comfort and savings is worth the time. Whatever your situation, let’s take a look at how to go about installing a new ceiling fan with a light. First, remove the old electrical box that’s in your ceiling by hammering up on it with a piece of wood, ex. Splice the switch light lead to the hot wire from the lamp and the switch fan lead to the hot wire from the fan. I knew it was a great opportunity to put together a tutorial for you so you couldA see that installing a ceiling fan isA not a difficult DIY project! This is the standard installation for a ceiling fan that doesn’t have a remote and a receiver.
Use a wire nut to attach the wires together, then wrap part of the bare wire around the ground screw attached to the mounting bracket. Errors will be corrected where discovered, and Lowe's reserves the right to revoke any stated offer and to correct any errors, inaccuracies or omissions including after an order has been submitted. Contact a licensed electrician if you have any doubts or questions about the connections, or if your home's wiring doesn't appear compatible with the changes you're making.
If the box is stuck, place a scrap of wood in the electrical box and tap the wood with a hammer to loosen the box.
Thread wires through pre-assembled downrod and hand tighten downrod onto the motor coupling (about 4-5 full turns). To connect the wires, hold the bare metal leads together and place a plastic wire connector over them, then twist clockwise until the connection is secure. Two will be holding down what’s called a canopy (cover) and the other two secure the top of the fan assembly to the actual mounting bracket. If you have a three-way wiring setup, connect black to black, white to white and blue to red. Plus, we had Casablanca fans in our previous house and they are well made and will last a long time.
Or in the case of the Casablanca fan, attach the green and yellow striped wire (from the hanging bracket) to the green wire from the receiverA and the ground wire from your ceiling box. If you have doubts about the suitability of the existing box, purchase and install a new one.
Yes, I was excited, especially because Casablanca hasA so many beautiful options for stylish fans. You also need to use a reputable electrician who is licensed and versed on your local permits. Make sure it's acceptable for ceiling fan installation and will support the weight of the fan.
Please note that installing the light kit may vary depending on your ceiling fan with lights. You can temporarily hang the fan assembly on the mounting bracket hook while you undo the wiring here. And I know, they have ceiling fans that will surely have the designers changing their tune. When the screws are out, gently pull the light kit down to where you see the attached wiring.



Fan light goes off randomly
Havells stand fans price list uk
Honeywell pedestal fan with remote 40


Comments to «Remove ceiling fan and install light fixture youtube»

  1. Dj_POLINA writes:
    And Height The ceiling and cabinet fans are still.
  2. Bakino4ka_fr writes:
    Off the power to the complete.