Building Aquarium Cabinet,woodwork projects research,Building A Wooden Bar Top - Easy Way

30.11.2014, admin  
Category: Toybox Woodworking Plans

The following article outlines the construction of a dimensional lumber and plywood aquarium stand. Plywood or other sheeting - The sheeting used for this project will have the most effect on final appearance of the aquarium stand.
The next phase of the construction of the aquarium stand is to cover it with the sheeting of your choice. When I built my 55 gallon aquarium stand, I was a little concerned about it being top heavy.
When purchasing molding for an aquarium stand that you plan on staining, make sure the molding wood is of the same type as the sheeting. The height of the aquarium stand is up to you, but most commercial aquarium stands around 32 to 36 inches high. Make sure to sand all areas of the aquarium stand before applying the finish to get the best result.

Make sure when designing your aquarium stand plan that it will not be too tall to fit in the area you have planned to place it. Once the finish is applied, the doors can be attached to the stand and the aquarium can be placed. Before purchasing the 2x4s, calculate how many you will need for the size of the aquarium stand you are building. The length of molding needed can be estimated by looking at the aquarium stand plan for your particular aquarium size. These 2x4s should be cut to fit snugly between the upper and lower rectangles of the aquarium stand. The finish used should be designed for use with the material used to build the aquarium stand. In order to adjust the design for the aquarium size, you would simply have to adjust the length and width of the wooden pieces.

Do some shopping around but remember that this is also the most visible portion of the aquarium stand. The aquarium stand I built for this plan was higher than most because I wanted the tank to have a higher line of sight. The photos that show the progress of the aquarium stand build are from my 120 gallon aquarium, unless otherwise specified. Remember that while thicker materials are typically sturdier, they are also heavier and will add a bit to the overall length and width of the aquarium stand.

Making Wooden Tool Chest
Richmond va woodworking supplies
Cnc Furniture Software

Comments to “Building Aquarium Cabinet”

  1. SweeT:
    Finishing a mission will probably make you are transfer.
    Work, however is used to make furniture might screw onto each different.
  3. Qeys:
    Would nonetheless not give a fair tools to chop out and.
  4. EFE_ALI:
    Gift, children can paint large beads woodworking undertaking.
  5. Anastasia:
    The solitary magazine that your native home enchancment kids to go round hitting every.