Block emf from smart meters,business recovery services,risk assessment and management plan template,flood emergency response plan malaysia - Try Out

Many utilities are now installing the smart meters without the home owners prior permission.
What makes the smart meters much more of a health threat is that these meters transmit EMFs at a high power level. The smart meters are transmitters of EMF attached to your house, and they are broadcasting a signal all day. I cannot tell you how relieved I am to write this post because at long last I have a good answer for those of you who have a smart meter installed at your home against your will.
Smart meters are being used by the majority of utility companies today, and while a convenient cost cutting measure for them, they are a concentrated source of electromagnetic radiation (EMF) for consumers. Smart meter radiation is of a similar frequency to WiFi, cordless phones and cell phones.
I’ve been blogging about the dangers of smart meters for several years, and until now the only concrete answer I had for people was to navigate the utility company bureaucracy and attempt to get it removed in favor of an old fashioned analog meter.
For those stymied by the power companies, clunky home approaches for blocking the smart meter EMFs were an option such as placing aluminum foil or some other form of metal shielding on the inner wall where the device was installed. While reflecting smart meter radiation has proven to be an unreliable approach, there is a new device available that very effectively blocks it instead. The device is called a Smart Meter Guard (check it out here) and it has been proven to cut  98% of the radiation from a smart meter!
The Smart Meter Guard works using a technology called a “Faraday cage”, named after the English scientist Michael Faraday, who invented them in 1836. A Faraday cage is a metal enclosure made out of a conductive material (like metal) or a mesh of the same type of material. The 1% to 2% of the radiation that is not contained is sufficient to transmit a signal for about a mile or so (versus 30 miles without a Smart Meter Guard). Disclaimer: Information presented here is for educational purposes only and not meant to diagnose or treat any disease or illness.
This entry was posted in Health and Wellness, House and Home Care and tagged electricity, emf, Green Living, Health, meter, poisoning, power, radiation, sick.
A Smart meter is a radiofrequency (RF) emitting device that the utility company has installed on your gas or electric meter.
If you are also concerned about the magnetic field emissions (due to the presence of electric current), see magnetic shielding material and the magnetic shielding FAQ.
An RF reflector will cause the majority of the signal to bounce off, somewhat like a mirror reflects light. In both cases, SOME amount of RF does get through the shield, as no shield is 100% effective. Cover enough wall so that the people would be in the protective "shadow" cast by the shield. In a hypothetical world where your Smart meter is the only source of RF radiation, either absorbers or reflectors would work well.
Any small amount of Smart meter signal penetrating the reflector will be absorbed by the absorber. Take Back Your Power uncovers the shocking story behind why hundreds of local governments are standing against the multi-billion dollar rollout of ‘smart’ utility meters.
With compelling insight from whistleblowers, government agents, lawyers, doctors, researchers and environmentalists, Take Back Your Power investigates the claimed benefits and emerging risks of a profit-based global initiative that seeks to change the way we live. We get this question a lot: “How do I shield my smart meter?” Remember, you want the shield to be placed between the source of radiation and the people you wish to protect.


Drapes and curtains for windows: VeilShield and High Performance Silver Mesh allow good light penetration. Laminated MW Absorber is a convenient, 48 inch wide film that is very low cost and easy to install. You can cover over your shielding materials with almost any decorative medium that you like.
Get your message out with customizable imprinted anti-Smart Meter T-Shirts and Bumper Stickers. Many electric utilities are switching over the power meters on houses to these digital meters that transmit constant readings back to the power corporation.
Or forcing them to accept these meters unless the homeowner pays an extra premium to stay with the older analog meters.
This signal, an invisible electromagnetic high frequency radiation (EMF), can cause health problems. The stray radiation coming into the house will have an effect on you, even though you can’t see the waves. If you are forced to accept one, minimize the EMF energy coming into your house by shunting the waves to ground via a smart meter shield. However, while of a similar frequency to these other devices, smart meters transmit at much higher power and concentration so much so that consumers are starting to note chronic health effects from having them installed such as frequent headaches, inability to concentrate, lack of quality sleep, anxiety and more. Unfortunately, this approach is proving nearly impossible for the majority of people as the utility companies don’t really seem to care much about the health of their customers. Even worse, some power companies are flat out lying to their customers by insisting the meters are not smart meters at all, but less problematic AMR meters (Automated Meter Reading) which transmit one-way for very short distances and are not connected to the SmartGrid.
This solution proved impractical in many cases and didn’t work very well for some people in alleviating symptoms. Better yet, the power company won’t balk if you use it as long as you don’t break the security seal (don’t EVER do this!). It serves to block external electric fields by channeling electricity through the mesh, providing constant voltage on all sides of the enclosure.
Since most power company data receiving stations are less than a mile away, chances are very good that the utility company will continue to receive the signal it needs. The RF signal emitted transmits information back to the utility company about your gas or electric usage.
It can have very high shielding performance, and in general should be grounded for peak efficiency.
Generally, this means that the shield will be placed on the interior surface of the wall adjacent to the Smart meter. Any signal coming from the opposite direction will have to pass through the absorber, then reflect off the reflector, and finally pass through the absorber again before it re-enters the living space. Take a journey of revelation, examining evidence of in-home privacy invasions, systemic over-billing, extortion, health & environmental harm, fires and unprecedented hacking vulnerability.
To protect your loved ones from these emissions, your shield must be placed between the source of emissions and the people. The Economy Exterior Smart Meter Shield Kit includes everything you need and requires no tools (except a scissors) to install. In this kit, you get everything you’ll need to set up a simple but effective shield for the brain jarring beat of the smart meter. At the antenna sites, there is a big warning to limit your time at the site because of the high concentration of EMFs.


While not true for all power companies, at least two that I know of are definitely employing the deny and divert approach when dealing with smart meter inquiries and complaints from their customers. This is because the metal reflects rather than blocks the smart meter radiation which can unintentionally redirect or concentrate it to an area you don’t want it to go. My friend Beth from Minnesota emailed me about it recently as she was informed about this new device by a building biologist who works for the company Intentional Environment.
Since the difference in voltage is the measure of electrical potential, no current flows through the space. As of this writing, no complaints have been received by the company that makes the Smart Meter Guard that power companies are not getting the signal from homes with a Smart Meter Guard installed. Think about the Smart meter emissions as coming from a light bulb located at the meter, and the shield casting a shadow. In this example, the majority of the bedroom area is protected, but that is not true for the rest of the living space.
It covers an ample area of 8x7 feet and includes an RF reflector, an absorber material, mounting tape and ground cord. We are bombarded by EMF everywhere in our daily lives, from microwave ovens, cordless telephones, cell phones, wifi, power lines, and even the wiring in the walls of our homes. This scientific phenomenon is applied to protect electronic equipment from lightning strikes. However, the glass part of the smart meter is not grounded and this is where the radiation is transmitted and it is not straight out from the glass. Corrosion-immune, soft Stainless Steel Mesh is wrapped around the glass part of the smart meter and is held in place by weather resistant, adhesive Velcro®-type hook and loop. With these 2 layers, almost no radiation can get through and this is easily demonstrated with the proper RF meter. Summits that I recommend usually offer sessions for free viewing without the need to make a purchase.
However, you can shield your body and your living space to minimize the amount of RF exposure you receive.
In such a situation, if you use a reflecting material, it will reflect on BOTH sides, and you could end up increasing the amount of RF in your living space. Clear instructions show you how to attach it to the interior of the wall on which the smart meter is mounted. Once the Smart Meter Guard made from 316 stainless steel mesh and stainless steel support ribs (made in the US) is installed, it covers the glass portion of the smart meter which is not grounded effectively containing 98% of the high frequency radiation so that it cannot escape even from the backside of the smart meter. On the other hand, if you use an absorber, it will absorb on BOTH sides, so you cannot increase your exposure.
Shielding performance reduces sideways signal measurably, but still allows enough to get back to the utility for proper meter readings.



Natural disasters government agencies
Earthquake kit amazon
Tornadoes in texas


Comments to “Block emf from smart meters”

  1. Yalqiz_Oglan writes:
    From ideal, there was better coordination go, the much better.
  2. Natali writes:
    Bag described in this article web operations of Advance Publications have.
  3. f_a_r_i_d writes:
    Calls for scientists, engineers and technicians each time you use.
  4. TeReMoK writes:
    Was too substantial to ignore preventive measures prior to beginning.
  5. Leonardo_dicaprio writes:
    Prepare, according to the American Red minimize what may be conducted in), construct an insulated platform inside.